Velcro sidesaddle shell holder

[zombiescanlearn]

Can anyone suggest another vendor that sell these other than 3gungear.com?

[MacOtac]

SKD Tactical sells them, but they might be out due to their sale they just had..... Ares gear has some too

[prc77]

I got one of mine 6 rounders from www.osoegear.com.
He will make you whatever size you want, but a 6 rounder fits nice on the 500's. Email him and tell what you want.

[cindynles]

These work great. I'm really happy with the ones I bought.

http://www.skdtac.com/product_p/ess.106.htm

[Sicarius]

I got one of mine 6 rounders from www.osoegear.com.
He will make you whatever size you want, but a 6 rounder fits nice on the 500's. Email him and tell what you want.

I sent him an email about some 6 round cards and he never got back to me. I went with the skd ones and I am happy with 7 rounders.
Kevin

[cindynles]

Its really easy to make the SKD 7 round into a 6 round. They were too long for my receiver so I just cut off the last loop and used a lighter to melt the ends and prevent fray.

[MossbergMan]

I just converted a couple of Tac-Star side saddles to velcro attachment. Attached the velcro to the steel plate/plastic shell holder and the mating velcro on the SG's receiver.
I've run this set up for years. Note to self however...cut out the velcro around your serial number and pin holes.

[zombiescanlearn]

Its really easy to make the SKD 7 round into a 6 round. They were too long for my receiver so I just cut off the last loop and used a lighter to melt the ends and prevent fray.

Looks like the SKD ones are out of stock. Does it come with the velcro that you put on your shotgun to mount the Shotgun Card? Where can you get some if it doesn't?

[cindynles]

Looks like the SKD ones are out of stock. Does it come with the velcro that you put on your shotgun to mount the Shotgun Card? Where can you get some if it doesn't?

No it doesn't come with loop side for your shotgun. I bought the 2" wide industral Velcro from Lowes. You get 10' for $8, more than you will ever need.

[zombiescanlearn]

No it doesn't come with loop side for your shotgun. I bought the 2" wide industral Velcro from Lowes. You get 10' for $8, more than you will ever need.

What do you use to mount that to your shotgun? Thanks!

[$P-Ritch$]

What do you use to mount that to your shotgun? Thanks!

That industrial velcro has adhesive backing already on it. Just trim, peel and stick. It's super strong too, once you put it on it's not going anywhere. I didn't see if anyone else mentioned it, but when you do mount it make sure you put the loop (soft side) on the receiver. All the velcro side saddles I have seen/used have the hook (rough) side incorporated into them.

[biloutkast]

I just converted a couple of Tac-Star side saddles to velcro attachment. Attached the velcro to the steel plate/plastic shell holder and the mating velcro on the SG's receiver.
I've run this set up for years. Note to self however...cut out the velcro around your serial number and pin holes.

I plan on doing this as well.

http://www.freewebs.com/socal_webshooters/diy_shotgun_side_saddle_velcro.htm

[prc77]

I trimmed theTacstar down a little.

[brent_mpk]

Nice job. I'm debating whether or not to put the hook or the loop side on the receiver....

I plan on doing this as well.

http://www.freewebs.com/socal_websho...dle_velcro.htm

I trimmed theTacstar down a little.

[zombiescanlearn]

Thanks for the advice gentlemen. SKD just got restocked, I'm going to buy it today and get it on my shotgun.