Unconfigured Ad Widget

Collapse

Shotguns, Rust, and Coating?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • D.M.C.
    Member
    • Jun 2008
    • 180

    Shotguns, Rust, and Coating?

    Forgive me if this topic has ever been covered, but after delving several pages deep into Search and finding nothing that discussed this, I thought I'd post something that's been on my mind.

    It's been my very limited experience but seems to be a common truism amongst the shooters I know that shotguns rust easily, much easier than rifles or handguns seem to anyhow. Given that, I was curious as to the "why's" and what can be done to prevent rusting in a shotgun, particularly if it has already sustained some patches of rust.

    Is it simply because of shotguns being smoothbore and relatively low cost in manufacturing that they don't seem to have particularly deep or high-quality finishes?

    How can shotguns used primarily in a wet or humid outdoor setting maintain rust prevention? Or is this not even a concern due to economy of return or 'disposability'?

    Is it cost effective or even practical to have a shotgun refinished or given a modern coating such a duracoat or cerakote?

    Being relatively inexperienced with shotguns, I am curious what insights people may have regarding these questions. Thoughts or advice?
  • #2
    mjsweims
    Senior Member
    • May 2009
    • 807

    Proper care prevents rust.

    I don't know where you get the impression shotguns are "cheap" As a rule well-built quality shotguns, best guns, etc. cost much more than rifles or handguns, often well into the 5 digit price range and sometimes into 6.

    Most well built shotguns are have rust blued barrels. Actions are nickel polished, color case hardened, or blued and often engraved. All that is required to maintain them in excellent condition is common sense - cleaning and oiling after use or exposure to moisture. Many of these guns are around that are 100+ years old and still in use.

    Perhaps you are referring to cheap shotties. Finish is not nearly as good as a well built shotgun. This also applies to rifles and handguns. You get what you pay for. Maybe owners of these guns don't clean or maintain them as they should so they rust out quickly, because they are so cheap they consider them disposable.
    Jack

    sigpic

    Comment

    • #3
      BigDogatPlay
      Calguns Addict
      • Jun 2007
      • 7362

      I have a 25 + year old Mossberg 500 that has been shot plenty in it's time, and well maintained. The barrel and mag tube are still deeply blued, although the mag tube has the honest wear marks that firing / cycling the gun will cause. The receiver has a solid anodizing all over and the bore of the original 18 inch barrel is still bright and smooth.

      I keep it (and all my guns) clean and lightly oiled. A little Break Free or WD40 applied to the blued metal keeps the rust away.

      Bluing is going to patina over time. I have several older guns that were my dads and grandfathers and they all have some manner or another of patina to them.
      -- Rifle, Pistol, Shotgun

      Not a lawyer, just a former LEO proud to have served.

      Americans have the right and advantage of being armed - unlike the citizens of other countries whose governments are afraid to trust the people with arms. -- James Madison

      Comment

      • #4
        D.M.C.
        Member
        • Jun 2008
        • 180

        Hrmm, okay. Most of what I've been getting is from LEO and Mary/Marine buddies using Remington 870's and their clones, plus my own shock at seeing my relatively new shotgun have small rust spots develop after being stored in a foam lined case for a few weeks after returning from a shooting trip. I heard back that it happens fairly often with Remington and similar models. Perhaps this is a fairly limited issue, but in regards to getting new finishes done, what is recommended? Just new bluing? Parkerizing? Cerakote? Duracoat?

        Comment

        • #5
          mjsweims
          Senior Member
          • May 2009
          • 807

          Don't keep it cased. Let it breathe and have dry air circulated around it, like in a safe. If you don't have a safe lean it against a dry wall in a closet.

          Try rubbing the rust spots with a patch and WD40. Most of the rust should come off without damaging the finish. For anything that doesn't come off, use a very light 0000 bronze wool and WD40.

          If the inside of the barrel is rusted use WD40 with a Tornado (my preference and I know many people don't like them) brush. If you can't find one use a bronze brush.

          Once you've got it cleaned lightly oil everything and put it away. If you don't use it and clean it periodically check it, reclean, and oil it every six months or so.

          If your gun is so bad that none of this works you might be better off getting a new one and maintaining it properly. Cost of recoating everything is going to be high relative to the cost of your gun.
          Jack

          sigpic

          Comment

          • #6
            D.M.C.
            Member
            • Jun 2008
            • 180

            Thanks mjsweims. I had already gone ahead and cleaned the rust with WD40 and then applied light coat of oil over the gun for the meantime. Nothing got damaged really, except that small flecks and spots of bluing are gone where the rust formed. It's nothing major, but I wasn't sure if there wasn't anything more I could do to prevent future problems if and when moisture come into contact with the metal. Storing it outside of the case is a good idea though, gives me impetus to eventually get a tall safe for storage. At this point my only irritation is that the cosmetic perfection of my shotgun was spoiled by the little spots. :-|

            Comment

            • #7
              Mug
              Member
              • Feb 2009
              • 249

              You are thinking of your SG as a work of art that needs to be preserved... Wrong mindset!

              Think of your SG as a tool that needs to function every time you need it, don't worry about the wear marks. I know rust isn't a wear mark, but don't worry about "cosmetic perfection".

              Embrace Your Wear Marks! -Some guy on SGW
              Last edited by Mug; 06-03-2010, 11:34 PM.

              Comment

              • #8
                SMOKEYMOUNTAIN
                Senior Member
                • Dec 2009
                • 1454

                Should WD-40 be used on a new SG as preventative maintenance to shield from rusting? Or should I just keep the new SG cleaned and oiled and only use the WD-40 when rust actually forms?
                ____________________________________

                Deterrence, Not Disarmament, Ended the Cold War.

                Comment

                • #9
                  Barabas
                  Veteran Member
                  • Oct 2009
                  • 3370

                  Don't use WD-40! If you must use something in a spray can that isn't specifically made for firearms, can be used for other purposes and has both letters and numbers in its name, get a can of BOESHIELD T-9. It was developed by Boeing chemists to prevent rust on high-tolerance steel parts stored on shelves getting the full effect of humid Puget Sound weather.

                  It is not cheap, however it is worth the cost. It has no silicone so it won't harm your wood and can be laid on thick or wiped clear and still provide excellent protection. I haven't had a problem with rust on the safe queens since I started using it. It works great out in the woodshop too. No more rusty saw blades.

                  Comment

                  • #10
                    BigDogatPlay
                    Calguns Addict
                    • Jun 2007
                    • 7362

                    In a drier environment, WD-40 works very well as a light top coating. I've been using it with excellent results for decades.

                    +1 to those farther up on storing guns cased, especially in a humid or coastal environment. That is as close to a 100% guarantee as you'll find that your gun is going to rust while stored. The plastic foam retains moisture and and does not breathe in any way or form.

                    As to LEO and military guns.... consider the usage. LEO shotguns are, typically, stored in the car sometimes for weeks and months on end with little to no maintenance. Constantly changing temperatures and little protection Military guns are going to be parkerized and, while they are generally going to be better maintained than a typical LEO shotgun, they are not treated gently and get the bejeebers shot out of them. The finish, even parked, is going to suffer accordingly.
                    -- Rifle, Pistol, Shotgun

                    Not a lawyer, just a former LEO proud to have served.

                    Americans have the right and advantage of being armed - unlike the citizens of other countries whose governments are afraid to trust the people with arms. -- James Madison

                    Comment

                    • #11
                      mif_slim
                      I need a LIFE!!
                      • Apr 2008
                      • 10089

                      Originally posted by BigDogatPlay
                      In a drier environment, WD-40 works very well as a light top coating. I've been using it with excellent results for decades.
                      Yup, same here.

                      Another way to not worry about rust is to paint it with any type of paint. I got tired of oil'n my shotguns/rifles so my HD M500 I painted it flat black. I've carried it in the rain and moist and it hasnt rusted yet. My 11-87 was ruined cuz I forgot to dry it. it was rusted in 2 hours!
                      Originally posted by Gottmituns
                      It's not protecting the rights of the 1%, it's IMPOSING new laws because of the 1%.

                      Comment

                      • #12
                        mjsweims
                        Senior Member
                        • May 2009
                        • 807

                        Originally posted by D.M.C.
                        Thanks mjsweims. I had already gone ahead and cleaned the rust with WD40 and then applied light coat of oil over the gun for the meantime. Nothing got damaged really, except that small flecks and spots of bluing are gone where the rust formed. It's nothing major, but I wasn't sure if there wasn't anything more I could do to prevent future problems if and when moisture come into contact with the metal. Storing it outside of the case is a good idea though, gives me impetus to eventually get a tall safe for storage. At this point my only irritation is that the cosmetic perfection of my shotgun was spoiled by the little spots. :-|
                        You can get bluing pens to touch up the bare spots. This won't be an exact match but doesn't stand out as much as bare metal. Always make sure there is a light coating of oil when stored and when you take it out. That way you shouldn't see any sign of rust.
                        My oldest shotgun is over 80 yo and has no signs of rust. I only use it about 50 days a year though.
                        Jack

                        sigpic

                        Comment

                        • #13
                          mjsweims
                          Senior Member
                          • May 2009
                          • 807

                          Originally posted by SMOKEYMOUNTAIN
                          Should WD-40 be used on a new SG as preventative maintenance to shield from rusting? Or should I just keep the new SG cleaned and oiled and only use the WD-40 when rust actually forms?
                          I prefer oil over WD40 for a coating. I use WD40 for heavy cleaning not coating. When storing a gun I definitely prefer a light coating of oil. I would use oil on a new gun for storage and before first use (you might need something else for initial cleaning - depends on the gun).
                          Jack

                          sigpic

                          Comment

                          • #14
                            Dhena81
                            Veteran Member
                            • May 2010
                            • 4587

                            If you have a storage like a case or safe use a Hydrosorbent Silica Gel. The only gun I ever had rust was a 870 I hated it so I bought the silica gel to put in my safe and also bought a Sentry Solutions Tuf-Cloth and this combination works really well for me.

                            Comment

                            • #15
                              TERRYGER
                              Member
                              • Dec 2009
                              • 357

                              never had a shotgun rust and many of mine were really old before most folks here were born

                              follow these rules

                              1. sun never sets on a dirty firearm.

                              2. wd 40 will displace moisture but it is NOT a good protectant.

                              3. never store firearms in a case, especially fabric cases.

                              4. see rule number 1.

                              Comment

                              Working...
                              UA-8071174-1