While on my 4 month break from the modern age(I didn't have a laptop or internet), I did some work in my free time. I picked up a new H&R single shot 12ga and went to work on my old 16ga SXS I got from a calgunner. Basically, I wanted to cut it down to the legal limit. I did not care about having a front sight because it's a shotgun. I cut down the barrels on each shotgun to about 18.5". On a single shot it actually looks really short. I had another single shot that I sold before that had a 18.125" barrel. I cut it down with a hacksaw while I had it in a vice. I cut it down more than 18.5" more like 18.75"ish. Then I used a grinder to make it even a smooth. Then I cut down the stock to bring it about 27". Which 1 more inch than the legal limit to be on the safe side. I was planning on shaping the stock into more of a pistol grip, that is why you can see part of the stock unfinish from where I was sanding. But then I grabbed the stock sleeve (holds 5 12ga shells) and it still fits. So I plan on probably keep the stock as is. I am still working on the 16ga SXS because I found out it needed an extractor or ejector to engange the firing pins and to pull out the shells. Anyways, here is the pictures of how it currently looks. Once again yes this legal because it has 18.5" barrel with 27/28" OAL.






I will post pictures of the SXS when I get it back.






I will post pictures of the SXS when I get it back.

)
My other one which was similar in weight but a little heavier wasn't bad at all to shoot. I shot slugs and 00 out of that one before. This one will be interesting
Do yourself a favor and wrap the barrel with some heat resistant tape so you can hold over the top of it while firing. 
Let me know when you come to LA.
Comment