Unconfigured Ad Widget

Collapse

Forend Retainer Nut - Boooo! >: (

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dadoody
    I need a LIFE!!
    • Oct 2005
    • 14692

    Forend Retainer Nut - Boooo! >: (

    So I got a Knoxx Compstock for my Mossberg for $85 bucks from Midwest Hunters Outlet. Awesome deal!

    It came with a Hogue grip forend too, which I find to be much better than the stock mossberg grip, but my problem has been with buying the forend retaining nut. I had to buy a forend wrench, which costs $30 shipped and no local stores sell it.

    A local gunshop had it, but wanted me to pay them $20 for me to have their gunsmith do it for me once.

    Why the hell do I have to pay so much for a tool I'll only use once. Ugh!

    It's probably too late to ask, but did any of yous guys find a good and cheap alternative to buying this tool?
    FUS RO DAH! ==== ┻━┻
  • #2
    The Cable Guy
    Senior Member
    • Aug 2008
    • 1277

    Originally posted by dadoody
    So I got a Knoxx Compstock for my Mossberg for $85 bucks from Midwest Hunters Outlet. Awesome deal!

    It came with a Hogue grip forend too, which I find to be much better than the stock mossberg grip, but my problem has been with buying the forend retaining nut. I had to buy a forend wrench, which costs $30 shipped and no local stores sell it.

    A local gunshop had it, but wanted me to pay them $20 for me to have their gunsmith do it for me once.

    Why the hell do I have to pay so much for a tool I'll only use once. Ugh!

    It's probably too late to ask, but did any of yous guys find a good and cheap alternative to buying this tool?
    Remove the forend from the magazine tube.

    Use a thin rod or screw driver (on its side) and lay it across the two notches. Twist away.

    www.theshootersblog.com

    Comment

    • #3
      Banshee933

      Yeah, you can cut a small dowel to fit in the two notches of the retaining nutand simply just turn it. Or use a pair of open pliers with the tips in the two notches and again just turn it.

      Comment

      • #4
        prc77
        Veteran Member
        • Dec 2008
        • 2578

        Originally posted by Banshee933
        Yeah, you can cut a small dowel to fit in the two notches of the retaining nutand simply just turn it. Or use a pair of open pliers with the tips in the two notches and again just turn it.
        I used a small piece of hacksaw blade.
        C Co. 509th ABN/PFDR
        83-85

        USPSA CRO
        MEMBER: USPSA, GSSF, Richmond Rod & Gun, Sunnyvale Rod & Gun


        sigpic

        Comment

        • #5
          dadoody
          I need a LIFE!!
          • Oct 2005
          • 14692

          Originally posted by The Cable Guy
          Remove the forend from the magazine tube.

          Use a thin rod or screw driver (on its side) and lay it across the two notches. Twist away.
          Ah damn it. I didn't think to just pull out the forend from the mag tube. Damn it. Thanks for the tip though. I guess I'll sell the wrench.
          FUS RO DAH! ==== ┻━┻

          Comment

          • #6
            dadoody
            I need a LIFE!!
            • Oct 2005
            • 14692

            Frustrated some more. Removed the forend retaining nut. Forend still not coming off. There's kinda clips or something inside.

            Are there ANY step by step instructions? I'm close to just smashing off the old forend grip.

            Edit: Never mind. Got it. Had to use muscle and rip it off. Guess the rubber just kinda got attached to the metal.
            Last edited by dadoody; 07-21-2009, 11:17 PM.
            FUS RO DAH! ==== ┻━┻

            Comment

            • #7
              The Cable Guy
              Senior Member
              • Aug 2008
              • 1277

              It should slide right off.. What forend do you have on there?

              www.theshootersblog.com

              Comment

              Working...
              UA-8071174-1