Unconfigured Ad Widget

Collapse

Mossberg Ghost Ring Sights Info?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Smitdogg
    Junior Member
    • Jun 2009
    • 95

    Mossberg Ghost Ring Sights Info?

    I just got a 590-A 20" barrel, 8+1 mag, from a Calgunner, Love this thing, mostly for HD, but gonna go skeet/trap shooting Thur. to get comfortable shooting a moving target, & get familiar with the gun. I've heard nothing but great things about Mossberg Ghost Ring Sights, There is a 590-A model that comes with these from the factory, I got the one that came with the heat shield instead. You can buy a kit, (made by Mossberg) on line for around $80.00, then you have to pay a Smith around $40 to silver solder the front sight on. A bit pricey, (considering that's almost half the gun's value) and time consuming. Not to mention I can't find these things in stock from Mossberg, or anywhere else on the net! So my question is a 2 parter: A) Does anybody have any experience with these on their gun? Are they that good, & worth all the time, trouble, & expense? & B) Does anybody have a line on where to find these things?
    Thanks!
  • #2
    9mm+P
    Junior Member
    • Jun 2009
    • 35

    Who need's sights on a shotgun? Get ready for some sore cheeks

    Comment

    • #3
      Rotten
      Member
      • Apr 2009
      • 116

      I just picked up a Mossy 930 SPX with ghost ring sights. Not sure if they are they same type as what your looking for. I haven't gotten used to them yet so I don't really care for them. Maybe that will change but the GRS means you can't get a good cheek weld as they are raised off the barrel. Also I find they block FOV when trap shooting and inhibit fast target acquisition.

      I realize trap shooting is not the purpose of a tactical shotgun so the sights would probably work fine for their intended uses. I am considering selling the Mossy in favor of a Remington 1100 Tac 2 with a standard bead sight. I think it's really just a matter of training my self to use the sight properly but I find myself trying to look over the sight to find the target rather than through it. It might be beneficial for me to learn to shoot it with both eyes open as a compromise. I need more range time with it is what it boils down to. Hopefully someone with more experience can answer your question better.





      Last edited by Rotten; 06-29-2009, 1:40 PM.

      Comment

      • #4
        Smitdogg
        Junior Member
        • Jun 2009
        • 95

        Thanks for the input! You have the LPA Ghost ring sight set up there. Which is another option I was looking at. Is the front one soldered on, or screwed on where the original bead was? Please let me know if you decide to sell these. I'd buy them from u.
        Thanks.

        Comment

        • #5
          Sheepdog1968
          Senior Member
          • Jun 2009
          • 1903

          I have a slightly older 590 (not the A1) that I wanted to put ghost rings sights on. For the rear ghost ring, I just bought the Mossberg as the top is all drilled and tapped to accept it. As for the front sight, I talked to a smith in the Bay Area about silver soldering on the Mossberg front sight. To put it on and reblue he thought it would be close to $200. Might be cheaper elsewhere but this guy is a great smith. I ended up just buying a new 590A1 barrel that had the front sight already on it for about $200. Everything works fine and am happy with it.
          RIP Louis Awerbuck. I miss you and your training.

          Comment

          • #6
            Rotten
            Member
            • Apr 2009
            • 116

            The front sight is permanently attached. The rear is mounted to a picatinny rail which is mounted to the receiver with Allen screws. This is all factory equipped hardware. The only alterations I have done was to ad the Choate PG stock and combat bolt handle. I think it would be easier to just buy a new gun equipped how you want it but they are available for purchase separately from LPA. They are the BAR11R type http://www.lpasights.com/catalog-shotgun.html

            I took some more close up shots for you to get a better idea if this is what you want.

            Rear sight...







            Comment

            • #7
              Rotten
              Member
              • Apr 2009
              • 116

              Front sight...










              Hope this helps. If you are near the south SF Bay Area perhaps we could meet at a range and you could try it for yourself. My time is very limited though so It may be awhile before I can free up a weekend off.

              Comment

              • #8
                prc77
                Veteran Member
                • Dec 2008
                • 2578

                Factory GRS with custom install for the brake. Brake and front sight installed by www.kingarmory.com
                Last edited by prc77; 12-04-2009, 7:11 AM.
                C Co. 509th ABN/PFDR
                83-85

                USPSA CRO
                MEMBER: USPSA, GSSF, Richmond Rod & Gun, Sunnyvale Rod & Gun


                sigpic

                Comment

                • #9
                  prc77
                  Veteran Member
                  • Dec 2008
                  • 2578

                  Originally posted by Rotten
                  I just picked up a Mossy 930 SPX with ghost ring sights. Not sure if they are they same type as what your looking for. I haven't gotten used to them yet so I don't really care for them. Maybe that will change but the GRS means you can't get a good cheek weld as they are raised off the barrel. Also I find they block FOV when trap shooting and inhibit fast target acquisition.

                  I realize trap shooting is not the purpose of a tactical shotgun so the sights would probably work fine for their intended uses. I am considering selling the Mossy in favor of a Remington 1100 Tac 2 with a standard bead sight. I think it's really just a matter of training my self to use the sight properly but I find myself trying to look over the sight to find the target rather than through it. It might be beneficial for me to learn the shoot it with both eyes open as a compromise. I need more range time with it is what it boils down to. Hopefully someone with more experience can answer your question better.






                  Rotten
                  Lets go shot gun'n Los altos rod and gun. On a sunday morning they open at 9am
                  C Co. 509th ABN/PFDR
                  83-85

                  USPSA CRO
                  MEMBER: USPSA, GSSF, Richmond Rod & Gun, Sunnyvale Rod & Gun


                  sigpic

                  Comment

                  • #10
                    Rotten
                    Member
                    • Apr 2009
                    • 116

                    Sounds good to me Chris. I could certainly use some more range time to sort out these sights. I know it's just me not adapting to them and not a fault of the sights themselves. I was getting comfortable enough with the gun at my last shoot with it that I could easily pick off two clays per throw but I still wasn't using the sights properly.

                    I guess I'm just old fashioned when it comes to shotgun sights.
                    Last edited by Rotten; 06-29-2009, 1:48 PM.

                    Comment

                    • #11
                      sp_train_77
                      Member
                      • Apr 2007
                      • 144

                      Sights on a shotgun, ghost ring or otherwise, are useful if you intend to do a lot of slug shooting and then at fairly fixed distances. They will build your reputation as a shotgunner par excellence as long as you are shooting at those distances. They are slower to use for general shooting (which includes large varmints at close ranges). The shotgun is designed for pointing and the drop of the comb of the stock aids in pointing versus aiming.

                      I trained folks on tactical use of shotguns for eight years and found most people could adapt to pointing fairly easily and adjust for different points of aim on B-27 targets at different distances fairly easily (remember that pointing at a target's chest at 25 yards effectively removes all the target above the neck!). The folks who could not adapt were so uncertain of their skills that they were dependent on having sights for any aim and did not progress in their training.
                      "Sacramento" Bruce Conklin

                      NRA Endowment
                      CRPA Life
                      SASS 44183
                      Mormon Posse 33

                      Comment

                      • #12
                        prc77
                        Veteran Member
                        • Dec 2008
                        • 2578

                        Originally posted by Smitdogg
                        I just got a 590-A 20" barrel, 8+1 mag, from a Calgunner, Love this thing, mostly for HD, but gonna go skeet/trap shooting Thur. to get comfortable shooting a moving target, & get familiar with the gun. I've heard nothing but great things about Mossberg Ghost Ring Sights, There is a 590-A model that comes with these from the factory, I got the one that came with the heat shield instead. You can buy a kit, (made by Mossberg) on line for around $80.00, then you have to pay a Smith around $40 to silver solder the front sight on. A bit pricey, (considering that's almost half the gun's value) and time consuming. Not to mention I can't find these things in stock from Mossberg, or anywhere else on the net! So my question is a 2 parter: A) Does anybody have any experience with these on their gun? Are they that good, & worth all the time, trouble, & expense? & B) Does anybody have a line on where to find these things?

                        Thanks!
                        Looks like this is a good link http://www.saltyshark.com/shopping/b...roduct_ID=2557
                        C Co. 509th ABN/PFDR
                        83-85

                        USPSA CRO
                        MEMBER: USPSA, GSSF, Richmond Rod & Gun, Sunnyvale Rod & Gun


                        sigpic

                        Comment

                        • #13
                          Smitdogg
                          Junior Member
                          • Jun 2009
                          • 95

                          Thanks 4 that link PRC77, The site says they have the Mossberg Sights in stock for $61.95, which is a good deal, I was gonna order 'em, but I prefer to do it over the phone. I went to "contact us" & tried to call, but the number is no good. That seems shady to me. Any experience with these guys? Ever get anything from them?
                          Thanks, Smit

                          Comment

                          • #14
                            prc77
                            Veteran Member
                            • Dec 2008
                            • 2578

                            I bought mine from them on line about 2years ago. no problem. Not picking up the phone sends a red flag for me. Keep look'n so will I
                            C Co. 509th ABN/PFDR
                            83-85

                            USPSA CRO
                            MEMBER: USPSA, GSSF, Richmond Rod & Gun, Sunnyvale Rod & Gun


                            sigpic

                            Comment

                            • #15
                              Sheepdog1968
                              Senior Member
                              • Jun 2009
                              • 1903

                              If you own an older Mossberg 500 with an 18.5" barrel, Brownells sells a conversion kit to make it a 20" barrel with an increased ammo tube capacity. This set up also has iron rifle sights (not ghost ring) already installed on the barrel. Cost I think was on the order of $100. Just pointing it out as an option. Of couse, it might be easier to just sell what you have and get the appropiate 590 that has the ghost ring set up on it.
                              RIP Louis Awerbuck. I miss you and your training.

                              Comment

                              Working...
                              UA-8071174-1