Unconfigured Ad Widget

Collapse

About those "light" target loads

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tallship
    Senior Member
    • Jan 2008
    • 609

    About those "light" target loads

    I've been reading quite a few posts where people are asking about the difference in light target loads and talking about 1 oz, 1 1/4 oz, 7/8 oz, etc.

    It's not really the weight of the load that makes the difference in recoil, it's the amount of powder behind the load. If you look at a box of shotshells, you'll see a number that is labelled "dr. eq." That stands for Dram Equivalent and is the measure of powder in the shell. If you have a box of shells that has a dr. eq. of 3 1/4, even with 1 oz of shot it's gonna bang you up pretty good. If you really want a light load, look for shells with a dr. eq. of 2 3/4. But if you really like like those sore shoulders, go for those 3 1/2 goose loads!
    "We got too many gangsters doin' dirty deeds, too much corruption and crime in the streets. It's time the long arm of the law put a few more in the ground...."
  • #2
    SCMA-1
    Veteran Member
    • Mar 2009
    • 4294

    Originally posted by Tallship
    I've been reading quite a few posts where people are asking about the difference in light target loads and talking about 1 oz, 1 1/4 oz, 7/8 oz, etc.

    It's not really the weight of the load that makes the difference in recoil, it's the amount of powder behind the load. If you look at a box of shotshells, you'll see a number that is labelled "dr. eq." That stands for Dram Equivalent and is the measure of powder in the shell. If you have a box of shells that has a dr. eq. of 3 1/4, even with 1 oz of shot it's gonna bang you up pretty good. If you really want a light load, look for shells with a dr. eq. of 2 3/4. But if you really like like those sore shoulders, go for those 3 1/2 goose loads!
    Actually, not quite true. This is from saami.org:


    "DRAM EQUIVALENT
    The accepted method of correlating relative velocities of shotshells loaded with smokeless propellant to shotshells loaded with black powder
    . The reference black powder load chosen was a 3 dram charge of black powder, with 1 1/8 oz. of shot and a velocity of 1200 fps. Therefore, a 3 dram equivalent load using smokeless powder would be with 1 1/8 oz. of shot having a velocity of 1200 fps. or 1 1/4 oz. of shot and a velocity of 1165 fps. A 3 1/4 dram equivalent load might have 1 1/8 oz. of shot and a velocity of 1255 fps. Abbreviated Dram Equiv."
    sigpic

    "Wherever I Walk,
    Everyone Is a Little Bit Safer Because I Am There.

    Wherever I Am,
    Anyone In Need Has a Friend.

    Whenever I Return Home,
    Everyone Is Happy I Am There."
    - "The Warrior Creed" ~ Robert L. Humphrey

    Comment

    • #3
      -hanko
      CGN/CGSSA Contributor
      CGN Contributor
      • Jul 2002
      • 14174

      Originally posted by Tallship
      I've been reading quite a few posts where people are asking about the difference in light target loads and talking about 1 oz, 1 1/4 oz, 7/8 oz, etc.

      It's not really the weight of the load that makes the difference in recoil, it's the amount of powder behind the load. If you look at a box of shotshells, you'll see a number that is labelled "dr. eq." That stands for Dram Equivalent and is the measure of powder in the shell. If you have a box of shells that has a dr. eq. of 3 1/4, even with 1 oz of shot it's gonna bang you up pretty good. If you really want a light load, look for shells with a dr. eq. of 2 3/4. But if you really like like those sore shoulders, go for those 3 1/2 goose loads!
      Fail, but not too badly

      Both the weight of the load and the amount of powder control recoil...with equivalent power weights, the heavier shot weight will have more recoil.

      Conversely, with equivalent shot weights, the heavier powder charge will have more recoil.

      Basic physics.

      -hanko
      True wealth is time. Time to enjoy life.

      Life's journey is not to arrive safely in a well preserved body, but rather to slide in sideways, totally worn out, shouting "holy schit...what a ride"!!

      Heaven goes by favor. If it went by merit, you would stay out and your dog would go in. Mark Twain

      A man's soul can be judged by the way he treats his dog. Charles Doran

      Comment

      • #4
        Millions-Knives
        Senior Member
        • Aug 2006
        • 623

        Here's what I did, I got enough bruises to encourage me to do some thinking.

        Regardless of DRAMS, Use the velocity of FPS and convert it into Meters Per Second.
        Then the actual weight or mass, majority of the time in ounces and turn those into GRAMS.

        So, a standard load I use, Remington STS heavy target:
        11/8 oz, 1235 FPS is converted into:
        39 grams x 376 meters per second = 14664

        Take another load I use in my O/U.
        Estate 1oz, 1200 FPS into:
        28 grams x 366 meters per second = 10248

        So, divide:
        10248/14664=.69885....
        And you get a load that produces 30% LESS Recoil by just dropping 1/8 of an ounce and 35 FPS.

        NICE!!
        John

        Comment

        • #5
          Tallship
          Senior Member
          • Jan 2008
          • 609

          Originally posted by -hanko
          Fail, but not too badly

          Both the weight of the load and the amount of powder control recoil...with equivalent power weights, the heavier shot weight will have more recoil.

          Conversely, with equivalent shot weights, the heavier powder charge will have more recoil.

          Basic physics.

          -hanko
          Basic physics, yes, but in the world of perceived recoil, I can really tell the difference between 2 3/4 dr and 3 dr, whereas I really can't tell the difference between 1 and 1 1/8 oz with the same dr eq.
          "We got too many gangsters doin' dirty deeds, too much corruption and crime in the streets. It's time the long arm of the law put a few more in the ground...."

          Comment

          • #6
            M198
            Senior Member
            • May 2009
            • 605

            sheesh, I should have paid more attention is physics class.

            Comment

            • #7
              Khram
              Senior Member
              • Jun 2009
              • 855

              Speed of the shot and the amount of shot being put out per pull of the trigger can and do matter,at least when hunting.

              With defensive loads I usually pay more attention to size of the shot but that matters when hunting as well as could be expected. I never did like the "tactical" slower buckshot loads but some do.

              Comment

              • #8
                bowfin
                Member
                • Jan 2009
                • 178

                Felt recoil is also affected by:
                * how much the gun weighs,(recoil has to overcome the inertia and weight of the gun to push against you)

                *the total area of the buttplate or recoil pad (the recoil is spread out over more area),

                *the forcing cone and choke of a gun (it takes more pressure to push a charge of shot out of a tight choke or severly tapered forcing cone, hence more recoil). A fouled or rough barrel also adds to this, but I can't say if it would be noticeable.

                *how one shoulders and holds the gun (a firm grip and good mount keeps the gun from "bashing" into your shoulder and face).

                *barrel porting if any.

                Until one reaches the heavier 3" loads, recoil will be manageable.

                Comment

                • #9
                  Khram
                  Senior Member
                  • Jun 2009
                  • 855

                  I thought porting more affected muzzle rise and not felt recoil?

                  Comment

                  • #10
                    ponderosa
                    Senior Member
                    • May 2009
                    • 1192

                    maybe the mass of the shooter would also play a factor...

                    Comment

                    • #11
                      maxicon
                      Veteran Member
                      • Oct 2005
                      • 4661

                      Originally posted by bowfin
                      Felt recoil is also affected by:
                      * how much the gun weighs,(recoil has to overcome the inertia and weight of the gun to push against you)

                      *the total area of the buttplate or recoil pad (the recoil is spread out over more area),

                      *the forcing cone and choke of a gun (it takes more pressure to push a charge of shot out of a tight choke or severly tapered forcing cone, hence more recoil). A fouled or rough barrel also adds to this, but I can't say if it would be noticeable.

                      *how one shoulders and holds the gun (a firm grip and good mount keeps the gun from "bashing" into your shoulder and face).

                      *barrel porting if any.

                      Until one reaches the heavier 3" loads, recoil will be manageable.

                      Another factor in felt recoil is the recoil impulse profile. The worst case is a standard manual gun (pump or break-action) where you get hit by the spike of the recoil. Semi-autos smooth out the spike more, as do recoil control devices like mercury inserts, spring-loaded stocks like the SpecOps, and soft, cushioned buttpads.

                      The amount of recoil energy is the same - back to your basic physics - but by harnessing it to do some work, like cycling the action or compressing the stock spring, you spread the impulse out more, which translates to subjectively less felt recoil.

                      I'm a bit recoil sensitive, and not only does a standard 12 gauge pump beat me up, my 20 gauge Savage 24C over/under does the same, even with light loads - I'm battered after just 20 rounds.

                      My 12 gauge pump with a Knoxx SpecOps or my 1100 12 gauge semi-auto are much more pleasant to shoot, and I can shoot hundreds of rounds with little discomfort.
                      sigpic
                      NRA Life Member

                      Comment

                      Working...
                      UA-8071174-1