Copolla T4 Benelli M4 Clone

[BigBoyPinoy]

Just bought one, anyone have any experience with this shotgun. All reviews I've read have been positive.

[swift]

Nvm, the guy next to me had a different Semiauto from Turkey, not a Coppola.

[Pugster]

I have the Copolla T4 with the pistol-grip stock. Listed below is my feedback:

Function:
I haven't had any issues cycling slugs at this point, but I am still in the middle of my break-in period. I want to shot at least 50 more slugs/buckshot before I try testing out birdshot (1-1/8 oz).

Interchangeability:
>> The following are compatible with my Toros:
(1) Mesa Stock for 922R
(2) DMW 1-Piece Tube for 922R
(3) Phase 5 Follower (12GSFBLUE) for 922R
(4) GG&G (GGG1030) Bolt Release for Benelli M1/M3 (Not a typo, it works on M4).
(5) GG&G (GGG2013) Extended Handle (Super tight fit but wears in over time)
(6) Benelli M4 barrel (81245)

Possible Incompatibility:
I had issues installing the following on my Toros (See MWG schematic for reference numbers):
(1) #56 (Windage Screw): Benelli windage screw could not fit within the Toros rear sight slot due to insufficient clearance.
(2) #61 (Sight Platform): Benelli sight platform could not fit within the Toros rear sight base due to insufficient clearance.
(3) #63 (Rear Sight Base): The Benelli Rear Sight Base did not line up with the holes on the Toros receiver.

https://www.midwestgunworks.com/benelli-m4/parts.html

[BigBoyPinoy]

Thanks for the info, so how much did all the additional parts cost you and what made you want to change them?

I have the Copolla T4 with the pistol-grip stock. Listed below is my feedback:

Function:
I haven't had any issues cycling slugs at this point, but I am still in the middle of my break-in period. I want to shot at least 50 more slugs/buckshot before I try testing out birdshot (1-1/8 oz).

Interchangeability:
>> The following are compatible with my Toros:
(1) Mesa Stock for 922R
(2) DMW 1-Piece Tube for 922R
(3) Phase 5 Follower (12GSFBLUE) for 922R
(4) GG&G (GGG1030) Bolt Release for Benelli M1/M3 (Not a typo, it works on M4).
(5) GG&G (GGG2013) Extended Handle (Super tight fit but wears in over time)
(6) Benelli M4 barrel (81245)

Possible Incompatibility:
I had issues installing the following on my Toros (See MWG schematic for reference numbers):
(1) #56 (Windage Screw): Benelli windage screw could not fit within the Toros rear sight slot due to insufficient clearance.
(2) #61 (Sight Platform): Benelli sight platform could not fit within the Toros rear sight base due to insufficient clearance.
(3) #63 (Rear Sight Base): The Benelli Rear Sight Base did not line up with the holes on the Toros receiver.

https://www.midwestgunworks.com/benelli-m4/parts.html

[jrara]

Just Picked up the Radikal SAX 2 which is basically the same gun as the Toros T4 just looking at the pictures.

[deadcoyote]

Very different but I have a stoeger m3000, which is a clone of the benelli M2, I’ve run a whole lot of rounds through it and it’s never had a failure yet.

[Pugster]

Thanks for the info, so how much did all the additional parts cost you and what made you want to change them?