Unconfigured Ad Widget

Collapse

KSG-12 (Non-Functioning)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • outlawdaveyjones
    Junior Member
    • Sep 2012
    • 64

    KSG-12 (Non-Functioning)

    Tried regular birdshot from Federal & Winchester (100 Round Box). Won't work worth a ****. Have to run Buckshot or 00 Buck or Slugs which costs money but its works 85% of the time! Is there a break in period before it cycles everything? I Slide pump hard enough to catch the next cartridge, pull trigger to find out nothing is in the tube. What have you all done to make it work both ways?
  • #2
    69Mach1
    Super Moderator
    CGN Contributor - Lifetime
    • Jan 2006
    • 15032

    What position is the mag tube selector on? Are you having a feeding issue? A trigger reset issue? A mag tube issue?
    sigpic
    69Mach1
    munkeeboi
    TURBOELKY
    antix2
    WTSGDYBBR
    tujungatoes
    jmpgnr24K

    Comment

    • #3
      Thanatos2203
      Senior Member
      • Jan 2012
      • 1200

      Being that it is a pump, bird shot versus buck shot shouldn't make a real difference in the way that it cycles. If you cycle the gun and it ejects, but then there is nothing in the chamber, it sounds like you are short stroking it. The KSG requires a very deliberate pump both going backwards and forwards. I have some well trained and competent guys have similar problems with my old one. They would then hand it back to me and I would shoot it without issue. Make sure you are giving it a full cycle all the way back when you are pumping the action.
      sigpic

      Comment

      • #4
        SkyHawk
        I need a LIFE!!
        • Sep 2012
        • 23532

        Yes, the KSG requires a very deliberate, like you really mean it - stroke.
        Click here for my iTrader Feedback thread: https://www.calguns.net/forum/market...r-feedback-100

        Comment

        • #5
          jmaglipay
          Senior Member
          • Feb 2007
          • 1360

          I had similar issue with my ksg with 100 round pack winchester bird shot. It would double feed or fail to eject the spent shell 60% of the time. It has to be the worst firearm purchase I've ever made.

          Comment

          • #6
            Thefeeder
            Calguns Addict
            • Jun 2007
            • 5011

            ><

            A pump needs to be smooth enough to rack with just the thumb and one finger.

            Rough and stiff is just unreliable in my book.

            Comment

            • #7
              K001
              CGN/CGSSA Contributor
              CGN Contributor
              • Oct 2014
              • 1003

              Which gen ksg makes a big difference...
              03-FFL/COE

              Comment

              • #8
                elSquid
                In Memoriam
                • Aug 2007
                • 11844

                Comment

                • #9
                  Nephthys
                  Member
                  • Feb 2017
                  • 300

                  Originally posted by elSquid
                  I’ve only had a chance to dryfire a recent production KSG with dummy rounds, so keep that in mind...

                  That said, one thing that I noticed was an apparent “false stop” while running the pump slowly.(1) What happens is that you appear to hit the end of the rearward pump travel, then run the action forward, but no shell gets picked up.

                  It turns out that if you pull through the false stop - it takes a decent amount of effort - you get another third or so inch of travel...and a shell gets released from a tube.

                  I pulled out a newish 870 and did the same test; the difference was noticeable as to how easy it was with the 870 during a slow pump.

                  The upshot appears to be that the KSG -really- needs a hard rack to ensure full travel of the action, and release of the shell. It’s not very forgiving. This was a new KSG, not sure if there is a break in where things get easier.
                  I've had my KSG (gen2 or 3, unsure) since Sept of last year, and have ran over 1k rounds through it, mostly slugs. I know that little "false stop" and that 1/3rd inch travel you're talking about, and it hasn't smoothed out for me. That said though, I believe I won the KelTec production lottery with my KSG, of those 1000 shots, I haven't had any malfunctions of any kind that weren't induced by me.
                  Last edited by Nephthys; 02-18-2018, 7:37 PM.

                  Comment

                  • #10
                    StuckInTheP.R.O.Ca
                    Veteran Member
                    • Feb 2013
                    • 2995

                    Mine had a shell release issue on my left tube. Sounds like the same isue. Try dry cycling a couple hundred times. The problem went away for me after doing this and has been totally reliable since, even with aluminum short base walmart ammo.
                    __________________________________________________ _____________




                    sigpic

                    Comment

                    • #11
                      outlawdaveyjones
                      Junior Member
                      • Sep 2012
                      • 64

                      Ok, up to ball on everyone's response:

                      1. My selector is always left or right when firing and have both issues reloading. The ejection is fine. Only in the middle when sitting in my bag when I travel to the range.

                      2. Its definitely not a GEN 1. Almost certain its a GEN 2, and not a GEN 3.

                      3. I do rack it back full stroke and a full stroke forward. I have a shorty Tapco forward grip on it.

                      4. I do notice a huge difference with High & Low brass. The High brass being on the slugs & buckshot seem to flow for a few rounds then give up. Maybe I'm just not racking the pump hard enough and still need to break it in?

                      Comment

                      • #12
                        NETar
                        Junior Member
                        • Feb 2018
                        • 12

                        Make sure to lube it well.

                        Comment

                        • #13
                          StuckInTheP.R.O.Ca
                          Veteran Member
                          • Feb 2013
                          • 2995

                          Originally posted by outlawdaveyjones
                          Ok, up to ball on everyone's response:

                          1. My selector is always left or right when firing and have both issues reloading. The ejection is fine. Only in the middle when sitting in my bag when I travel to the range.

                          2. Its definitely not a GEN 1. Almost certain its a GEN 2, and not a GEN 3.

                          3. I do rack it back full stroke and a full stroke forward. I have a shorty Tapco forward grip on it.

                          4. I do notice a huge difference with High & Low brass. The High brass being on the slugs & buckshot seem to flow for a few rounds then give up. Maybe I'm just not racking the pump hard enough and still need to break it in?
                          Let's see if I got this straight. Your having no problems with extraction or ejection. Your problem is after firing, extracting and ejecting a spent case and moving the pump forward the next she'll isn't being released from the magazine tube so it can be chambered?

                          If so that is the exact problem I was having. Also unless your having problems with sticky extraction I don't see how high or low base would make a difference.

                          Also note that Keltec does not recommend aluminum low base shells due to supposed sticky extraction issues with those shells. But like I said earlier mine runs fine with them.
                          __________________________________________________ _____________




                          sigpic

                          Comment

                          Working...
                          UA-8071174-1