Unconfigured Ad Widget

Collapse

have you patterned an SBE3?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • threeperreaper
    Member
    • Jan 2017
    • 146

    have you patterned an SBE3?

    I'm interested in hearing from anyone that owns an SBE3.

    Before buying any shotgun I do an insane amount of research, browsing every forum possible, every single youtube video possible, etc. etc.

    Very few people actually take the time to pattern their shotguns but I read from a few SBE3 owners that patterned their shotguns and they all patterned abnormally high (even w/ multiple chokes and loads). Not just slightly high of center, but abnormally high. Like, too high. The guns were shipped back in to Benelli and they were told it was "within spec" and that they were designed to shoot high. I understand some guns are meant to shoot higher than point of aim, but these SBE3 owners complain the guns pattern excessively higher than any other gun they have owned.

    I am wondering if I am reading 5 or 6 bad apples or if it is true that all SBE3s pattern abnormally high

    therefore, i just want to hear from SBE3 owners that have actually taken the time to pattern their guns before I run out and buy one.

    thank you
  • #2
    Thefeeder
    Calguns Addict
    • Jun 2007
    • 5011

    ><

    My M2 came with stock shims, I'm assuming the SBE does also. Have any of those people used them to adjust the POI?

    Comment

    • #3
      threeperreaper
      Member
      • Jan 2017
      • 146

      Originally posted by Thefeeder
      My M2 came with stock shims, I'm assuming the SBE does also. Have any of those people used them to adjust the POI?
      shims or no shims, you look down the barrel, line up the two beads and it shoots high.
      i don't think shims would change the point of impact if both the bead and the mid-bead are perfectly lined up, am i wrong?

      Comment

      • #4
        BOBGBA
        CGN/CGSSA Contributor
        CGN Contributor
        • Sep 2010
        • 2405

        Have you read these?

        Randy Wakeman Outdoors is the independent resource for candid, hard-hitting firearms information, evaluations, and opinions.


        I bought a SBE3 about a month ago. 1st time I took it out seemed to fringe hit the ducks. Finally had to shoot at a cripple on the water. He was about 40 yrds out. Shot at him a couple of times & couldn't see where the BB's are hitting. He was close to the opposite bank. Took it to a pattern...
        God Bless America - My iTrader rating - https://www.calguns.net/forum/market...2-transactions

        Comment

        • #5
          threeperreaper
          Member
          • Jan 2017
          • 146

          Originally posted by BOBGBA
          Have you read these?

          Randy Wakeman Outdoors is the independent resource for candid, hard-hitting firearms information, evaluations, and opinions.


          http://www.shotgunworld.com/bbs/view...?f=61&t=451930
          I had read the one from shotgunworld and the randy Waksman article had all the same stories j was actually referencing.

          I was hoping one or two trusted Calgun members could confirm this issue before I went out and bought one..

          I have an SBE2 and was looking for a new gun. I never thought the SBE3 was worth upgrading because I thought the changes were so minimal but I shouldered it the other day and absolutely fell in love with it.

          Definitely won't be buying it if the point of aim is so out of whack like so many have reported

          Comment

          • #6
            BOBGBA
            CGN/CGSSA Contributor
            CGN Contributor
            • Sep 2010
            • 2405

            I try not to fall for internet hype (good or bad), but in this case I don't think I'd buy one without shooting one first (and I like Benelli).

            Send Benelli an email and ask them what their spec is for POA/POI with their modified (or your choice) choke at 40 yards. Or ask them what their detailed spec is.

            The answer or lack of answer might tell you a lot.
            God Bless America - My iTrader rating - https://www.calguns.net/forum/market...2-transactions

            Comment

            • #7
              threeperreaper
              Member
              • Jan 2017
              • 146

              Well apparently others have contacted Benelli and showed them their results. Benelli' response was that their results were within spec.

              Sad to say that if the SBE3 is going to stay the same and just pattern extremely high (and much higher than any other shotgun I've used) I'll just pass

              I've been a huge fan of my SBE2. I wanted the SBE3 to scratch my new gun itch, but maybe I'll try the A400 or possibly the super vinci

              Comment

              • #8
                Sandro
                Banned
                • Dec 2015
                • 532

                To scratch your new gun itch just buy a good gun, not some junk, The good i mean Trystar...


                Just kidding.
                I heard from many SBE3 people do not like them. Buy Browning Maxus, or V3 you will be happy

                Comment

                • #9
                  threeperreaper
                  Member
                  • Jan 2017
                  • 146

                  Originally posted by Sandro
                  To scratch your new gun itch just buy a good gun, not some junk, The good i mean Trystar...


                  Just kidding.
                  I heard from many SBE3 people do not like them. Buy Browning Maxus, or V3 you will be happy
                  V3?

                  Comment

                  • #10
                    Sandro
                    Banned
                    • Dec 2015
                    • 532

                    Originally posted by threeperreaper
                    V3?
                    Yep, V3 read reviews.
                    IMO Currently it is the best for the money.
                    Remington V3 Sport 12 Gauge semi-automatic shotgun with a 28 inch barrel, 3 inch chamber, Versa Port gas system, bead sights, and adjustable fit.

                    They also have camo for $80 more

                    ..
                    Last edited by Sandro; 10-06-2017, 9:16 PM.

                    Comment

                    • #11
                      JagerDog
                      I need a LIFE!!
                      • May 2011
                      • 15888

                      Originally posted by threeperreaper
                      shims or no shims, you look down the barrel, line up the two beads and it shoots high.
                      i don't think shims would change the point of impact if both the bead and the mid-bead are perfectly lined up, am i wrong?
                      If the rib is angled (low in front) the gun will shoot high in relation to beads. Pretty pronounced on many current trap guns. Field guns shouldn't shoot high.
                      Palestine is a fake country

                      No Mas Hamas



                      #Blackolivesmatter

                      Comment

                      • #12
                        sloppy joe
                        Senior Member
                        • Aug 2006
                        • 776

                        Have you checked out the ethos? It appears to me to be very similar to the SBE3

                        Comment

                        Working...
                        UA-8071174-1