Unconfigured Ad Widget

Collapse

Remington 870 Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Crusader
    Veteran Member
    • Jun 2008
    • 2995

    Remington 870 Problem

    So 10 days ago I helped a friend pick out a HD shotgun. He chose an 18" Remington 870. Today, we brought it back to his place and loaded up some snap caps. He loaded the snap caps and chambered them, and at first everything worked perfectly.

    However, when I tried to load the rounds, they ended up spitting out the bottom of breech. After messing with the shotgun for a few minutes, we found that if I pumped fast and hard, but snap cap would eject out the bottom.

    I have never seen a gun malfunction in such a way. In examining the shotgun, I cannot figure what causes the round to eject out the bottom.

    I called the store and asked what they thought, and all the salesman said was to bring it in and they'll look at it.

    Does anyone have any idea what the problem is with this 870? I am wondering what his options are. It seems to me that if the store can't manage to fiddle with it a little bit, my friend will either need to send it off to Remington or return it to the store. Any thoughts?
  • #2
    USMC Tanker
    Member
    • Dec 2008
    • 237

    Let me get this straight...

    Your snap caps are ejecting out of the bottom of the receiver, i.e. the "loading port" rather than out of the right side of the receiver, i.e. the ejection port?

    I don't see how the shells could be falling out the bottom unless the carrier wasn't going into the closed position.
    "I like to see a man proud of the place in which he lives. I like to see a man live so that his place will be proud of him." - Abraham Lincoln

    Semper Fidelis

    Comment

    • #3
      laguns
      Member
      • Jun 2004
      • 139

      It could be the snap caps

      Comment

      • #4
        Crusader
        Veteran Member
        • Jun 2008
        • 2995

        Originally posted by USMC Tanker
        Let me get this straight...

        Your snap caps are ejecting out of the bottom of the receiver, i.e. the "loading port" rather than out of the right side of the receiver, i.e. the ejection port?

        Yes, that's correct. The caps fly straight out the bottom of the receiver, through the loading port.

        And yes, I have no idea how this is happening either, which is why I posted the question.

        I thought the snap caps might be the problem, but how does that make sense? They weigh approximately the same as a normal 20 gauge round and are the same size. What would cause them to fly out the loading port?

        Comment

        • #5
          DVIII
          Member
          • Dec 2008
          • 420

          Are they 20 gauge snap caps in a 12 gauge gun? I know... it may be a dumb question, but I have to put it out there...

          Comment

          • #6
            FullMetalJacket
            Senior Member
            • Jan 2008
            • 536

            Are the snap caps at least 2-3/4" long? Or are they shorter?

            (If you see where I'm going...)

            Comment

            • #7
              SFFRONTMAN
              Vendor/Retailer
              • Jul 2007
              • 1531

              I had the same problem, you need to shove the snap caps far into the loading port, they are out of spec or at least the ones I used were. You will be fine with normal shells.

              Comment

              • #8
                Crusader
                Veteran Member
                • Jun 2008
                • 2995

                They may not be full length. I didn't actually measure them, but in standing one right beside a 2 3/4" buckshot shell he also bought, the snapcap actually looked longer.


                And no, it's a 20 gauge snapcap in a 20 gauge gun. I would feel like a complete idiot if we made that mistake, but I know that we didn't. Besides, how would the rounds stay in the magazine? And how would they properly eject when they WERE chambered?



                Edit:
                And remember, the snap caps only fly out of the bottom of the receiver when I pumped the action HARD. If it was pumped slowly, the rounds drops out of the magazine and chambered normaly.
                Last edited by Crusader; 01-27-2009, 11:43 PM.

                Comment

                • #9
                  SFFRONTMAN
                  Vendor/Retailer
                  • Jul 2007
                  • 1531

                  Same thing happened, check if the rim is deformed, sometimes the shell stop will not always catch it. When you go out shooting I will bet you have no problems at all.

                  Comment

                  • #10
                    Crusader
                    Veteran Member
                    • Jun 2008
                    • 2995

                    Apparently the problem has stopped, although it was me that was having the rounds drop more than my friend was. I don't know, maybe tomorrow we'll try loading a few different live rounds and see if they work. Kinda nervous about loading live rounds into a potentially defective firearm though. Oh well.

                    Comment

                    • #11
                      SFFRONTMAN
                      Vendor/Retailer
                      • Jul 2007
                      • 1531

                      You should not have a problem, just remember the saftey rules .

                      Comment

                      • #12
                        Dr.12ga
                        Junior Member
                        • Nov 2008
                        • 68

                        ive had snap caps fail to eject out of pistols because they are slightly undersize, probably just the snap caps. Only thing I could think of happening is when the carrier is in the up position, a snap cap slips by the shell latch on the magazine.

                        Comment

                        • #13
                          Crusader
                          Veteran Member
                          • Jun 2008
                          • 2995

                          Originally posted by Dr.12ga
                          ive had snap caps fail to eject out of pistols because they are slightly undersize, probably just the snap caps. Only thing I could think of happening is when the carrier is in the up position, a snap cap slips by the shell latch on the magazine.
                          Yes, but the only time the loading spoon is in the up position is when it's actually chambering a round up into the breach, by which time the snap cap has already flown out the bottom of the receiver.

                          Took it to the local Remington repair center, or whatever it's called. We told the guy what the problem is and he said "it's not broken, just shoot it."

                          I don't think I've ever heard more idiotic advice. I can certainly understand if maybe he's seen several cases of shotguns having the same problem, and at this point he figures he knows what's wrong. However, if the gun is actually broken and my friend loads and fires it, what happens if it explodes in his face? To me, there seems to be a legitimate problem with the shotgun, and all the tech says is "just shoot it."

                          Maybe I'm just being paranoid. But I have never seen this happen with a shotgun before, so I'm nervous about live rounds and the potential outcomes.

                          Comment

                          • #14
                            Dr.12ga
                            Junior Member
                            • Nov 2008
                            • 68

                            the tech sounds like a genius. you could try cycling real ammo through it, to see if there is still a problem. But I would be worried about firing if there was any question of the breech not locking.

                            Comment

                            • #15
                              squishyhead
                              Member
                              • Nov 2008
                              • 228

                              This is what happens when you purchase a 20 gauge 870! It should be 12 or nothing! Anywho, I'd say make sure the loading port cover comes down after the last snap cap is loaded. If it's getting stuck when you push a shell in, they're just going to come flying right back out when you go to chamber!
                              "I have 3 lower receivers, 1 upper receiver and two middle fingers." -tiki

                              "As someone I know said one time, going after NFA stuff right now is like asking the girl you just met in the bar if she's into anal sex. Babysteps..." -leitung

                              Comment

                              Working...
                              UA-8071174-1