Unconfigured Ad Widget

Collapse

dirty Kicks High Flyer choke...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PoorRichRichard
    Veteran Member
    • Apr 2012
    • 3340

    dirty Kicks High Flyer choke...

    This choke is great for everthing from lead 7.5 shot to size 2 shot in steel- and hearin lies the problem- I use it all the time, and it's getting really dirty. Gunk buildup in the port holes especially. What kind of solvent can I use soak/clean this choke without removing the blueing?
    1A - 2A = -1A
    Originally posted by Wherryj
    If I had a nickel for every gender that exists...
    ...I'd have $0.10.
    Conservatives think liberals are people with bad ideas. Liberals think conservatives are bad people.
    --- Dan Bongino
    Originally posted by EM2
    Some liberals are evil people out to control others. (Hillary, Pelosi, et.al.)
    Many liberals are lemmings and will follow whomever espouses what they 'feel'.
  • #2
    hermosabeach
    I need a LIFE!!
    • Feb 2009
    • 19892

    Most chokes get fowled with plastic from wads...

    Not sure what you see in yours after the traditional cleaning...
    Rule 1- ALL GUNS ARE ALWAYS LOADED

    Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)

    Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET

    Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
    (thanks to Jeff Cooper)

    Comment

    • #3
      hermosabeach
      I need a LIFE!!
      • Feb 2009
      • 19892

      Rule 1- ALL GUNS ARE ALWAYS LOADED

      Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)

      Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET

      Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
      (thanks to Jeff Cooper)

      Comment

      • #4
        hermosabeach
        I need a LIFE!!
        • Feb 2009
        • 19892

        I don't know your port size... Besides wad solvent(above) can you find a bore brush to use on the ports?

        17hmr or 22 caliber??

        Or chuck up a drill backwards, wrap a bit with a patch and run the wrapped bit into the port holes... Finish with flitz to polish the comp port holes
        Rule 1- ALL GUNS ARE ALWAYS LOADED

        Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)

        Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET

        Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
        (thanks to Jeff Cooper)

        Comment

        • #5
          JagerDog
          I need a LIFE!!
          • May 2011
          • 15815

          Acetone (or ed's red with acetone, or transmissission fluid with acetone) works well on plastic. Proper blueing is unaffected.
          Palestine is a fake country

          No Mas Hamas



          #Blackolivesmatter

          Comment

          Working...
          UA-8071174-1