Escort 12ga pump shotgun from turkey

[Gp100]

I bought one of these from Turners. It is a pretty good shotgun so far.
Does any one have one?

[frigginchi]

I bought the auto loader. i like it so far

[WokMaster1]

It's a bit lighter than a Mossberg or 870. Do break it down & lube it up well. I let mine sit in the safe for a while & saw some rust building inside the slide arm area.

Anyway, it shoots well & does kick a bit more. It's my trunk gun on an occasional basis.

[kingjoey]

We have two demo guns that are Escorts, one is a pump, one is an auto. Both have been great guns and have worked 100%.

[frigginchi]

Do you know where i can get mag extensions and a slug barrel? Maybe a cool brake too

We have two demo guns that are Escorts, one is a pump, one is an auto. Both have been great guns and have worked 100%.

[kingjoey]

I haven't seen any rifled barrels for them, but the barrel on the pump is a cyl. bore which is optimal for slugs. The mag extension on the pump is a custom built one from GunConnection (MAX100 on ShotgunWorld.com) and the one on the auto is a Tacstar +3 for a Rem870. The Escorts have the same thread as the 870. We produce the brake/suppressors, the unit pictured is a KA-1212 and we also produce a breacher variant

[WokMaster1]

I haven't seen any rifled barrels for them, but the barrel on the pump is a cyl. bore which is optimal for slugs. The mag extension on the pump is a custom built one from GunConnection (MAX100 on ShotgunWorld.com) and the one on the auto is a Tacstar +3 for a Rem870. The Escorts have the same thread as the 870. We produce the brake/suppressors, the unit pictured is a KA-1212 and we also produce a breacher variant

some info on the brake (how it is attached, price, etc) & where to get it would be cool.

[kingjoey]

some info on the brake (how it is attached, price, etc) & where to get it would be cool.

They're listed on our website www.kingarmory.com. The usual price (parts/labor/misc) runs about $152-157, but we have an "Obama Sale" going right now that gets you $4 off the brake and 10% off any barrel work/installations so you'd be looking close to $140 till 1/20/09. The brakes come as a DIY kit that is pretty easy to install (see instructions and details here: http://kingarmory.com/My_Homepage_Fi...(PM08-001).doc) or you can send the barrel to us and we do a 'hidden weld' install to attach it permanently. With the permanent attachment you can get the barrel cut to 16" and the brake will give it the legal 18" length. We're in from 8-6 every day, feel free to call if you got any questions or shoot me a PM/email.