Unconfigured Ad Widget

Collapse

What's weird?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dark&Good
    Senior Member
    • Oct 2008
    • 2106

    What's weird?

    Hi,
    I am - last weekend I went hunting to Eldorado NF. Right before that, went to the range to sight in my Mossberg 500 12ga slugster with the new scope. Fired 5 Fed. sabot slugs, cool, let's try the Brenneke Black Magic 3"! Everything fun, including the recoil - had a PAST shoulder pad on - but the empty shell doesn't fly out, just sits in the chamber, no matter how slow or hard I rack it... and almost all Brennekes do just the same. I used a house key on the rim to move it back a bit, that loosened it ok. The same kept on happening during the hunt - ejection just didn't happen, the new shell trying to find a place to fit after it came out of the mag... Oh my, I went for bear, what if I would've found one and needed a follow-up shot?
    Does this problem have an explanation that you guys know of? Is the shell weird or the Mossy?
    "I don't know where you came from, and I don't know where you've gone
    Old friends become old strangers between darkness and the dawn..."

    Ben Harper

    "It's a free country... or, at least, it will be."
    - The Patriot -
  • #2
    swifty
    Senior Member
    • Mar 2008
    • 929

    Sounds like the ejector is loose. Look into the ejection port at the left receiver wall. There should be a large screw that holds the ejector in place. Assuming these parts did not fall out, just tighten the screw. With Loctite preferably. If the parts are missing, they will have to be replaced.

    Also check for broken extractors.

    Comment

    • #3
      Dark&Good
      Senior Member
      • Oct 2008
      • 2106

      Thanks, I'll have a look tonight. But if the ejector would be loose, wouldn't the Fed. slugs also just stay in?
      "I don't know where you came from, and I don't know where you've gone
      Old friends become old strangers between darkness and the dawn..."

      Ben Harper

      "It's a free country... or, at least, it will be."
      - The Patriot -

      Comment

      • #4
        Dark&Good
        Senior Member
        • Oct 2008
        • 2106

        Oh, forgot something that may help figure this out: the Fed. slugs (that always jumped out properly) were 2 3/4...
        "I don't know where you came from, and I don't know where you've gone
        Old friends become old strangers between darkness and the dawn..."

        Ben Harper

        "It's a free country... or, at least, it will be."
        - The Patriot -

        Comment

        • #5
          Ricky B
          Junior Member
          • Dec 2005
          • 23

          Originally posted by Dark&Good
          Oh, forgot something that may help figure this out: the Fed. slugs (that always jumped out properly) were 2 3/4...
          OK, then check to make sure that the barrel says that it's chambered for 3" shells. Most likely is, but it'll take only a moment to check. If not, then you have a serious safety issue using 3" shells, not simply an ejection issue.

          Comment

          • #6
            Dark&Good
            Senior Member
            • Oct 2008
            • 2106

            Carved in the barrel, it says "chambered for 2 3/4" and 3" shells"
            "I don't know where you came from, and I don't know where you've gone
            Old friends become old strangers between darkness and the dawn..."

            Ben Harper

            "It's a free country... or, at least, it will be."
            - The Patriot -

            Comment

            • #7
              Dark&Good
              Senior Member
              • Oct 2008
              • 2106

              Ejector not lose at all...
              "I don't know where you came from, and I don't know where you've gone
              Old friends become old strangers between darkness and the dawn..."

              Ben Harper

              "It's a free country... or, at least, it will be."
              - The Patriot -

              Comment

              • #8
                Conker
                Member
                • Apr 2007
                • 114

                Was it overly worn out? Could it be that the base and/or hull expanded too much for the ejector and extractor to get it out? Was it even hard to extract with the house key? If it was in there good and tight, that would be my best guess.

                Had it happen to me with one of my reloaded 2 3/4." I almost had to rack the shotgun by slamming it down on the ground.
                Last edited by Conker; 10-30-2008, 7:46 AM.

                Comment

                • #9
                  Dark&Good
                  Senior Member
                  • Oct 2008
                  • 2106

                  No, the hull looked usual after extraction and wasn't hard to pull it out with the key.
                  I just thought of measuring the rim... and everything else, and do the same for the Fedz. I'd like to do some bear hunting while the season is on here, and I would be sad to not be able to use the Black Magic 3". I'll go to a range and observe the hulls again...
                  "I don't know where you came from, and I don't know where you've gone
                  Old friends become old strangers between darkness and the dawn..."

                  Ben Harper

                  "It's a free country... or, at least, it will be."
                  - The Patriot -

                  Comment

                  Working...
                  UA-8071174-1