Tweet
I was out shooting the other day and I was having feeding issues. my dad gave my this rifle awhile back and It needed some work on the bolt. so I fixed it all up and finally took it out. when I went to chamber a round. it (not all the time) would either miss the round or jam the round halfway in bending the casing. I had to hold the magazine in the same way I would hold the forend of the rifle to feed properly. any help would be appreciated. the magazine needs to seat higher I think.
-
-
Have you taken it out of the stock?
You can tweak the magazine catch ( it is connected to the receiver under the stock) .
Trial and error works , and a little goes a long way, bend ever so little at a time.
you will need to try the mag out with the action in the stock each time you tweak it.Bweise says "I have to say the situation was not at all helped by 22 yr old former Airsoft douches who kept touting here, "But possession is not illegal!" "
Fighting on the internet is like being in the special Olympics , everybody wins but your still retarded.
Librarian " Calguns is not a 'general discussion board". -
Or try another mag! DRComment
There are currently 5172 users online. 171 members and 5001 guests.
Most users ever online was 65,177 at 8:20 PM on 09-21-2024.
Comment