Unconfigured Ad Widget

Collapse

HELP...how do i fix "fuzzy" 22 ammo

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bullitt01
    Veteran Member
    • Sep 2013
    • 3905

    HELP...how do i fix "fuzzy" 22 ammo

    Well i was digging around on my ammo shelf in the garage and i find a box with about 5k of 22 rounds. Looks like some water had got in there and the bullitt itself has like fuzzy oxidation on it, kinda white/green.

    Are these fix-able or should i not mess with them and chuck-um!?
  • #2
    OldShooter32
    Senior Member
    • Jan 2012
    • 2056

    Toss them in a vibratory tumbler with some walnut for a while. No, they will not detonate. No, the powder won't turn to dust and explode.
    Check cases for deterioration -- if they have spots of corrosion, toss them rather than risk a split case or separation. Burning is the best way to dispose of them, but it takes a special burn barrel to avoid the low-velocity shrapnel that will result. When I was a kid, my mother inadvertently tossed some dryer lint, containing some .22 rounds from my jeans, into the fireplace. It was exciting for a while, but nobody got hurt. I wouldn't recommend that though.
    "If we make enough laws, we can all be criminals."

    Walnut media for bright brass
    http://www.calguns.net/calgunforum/s...d.php?t=621214

    Comment

    • #3
      BruinGuy
      Senior Member
      • Apr 2011
      • 1456

      Post some pictures. If they're really corroded I wouldn't risk it. With 5K rounds, it would be worth picking through to find the good ones, though.
      Originally posted by CSACANNONEER
      Keep in mind that you don't have a clue.

      Comment

      • #4
        Sputnik
        Senior Member
        • May 2011
        • 2166

        It isn't just mold is it? If water gets in someplace that stuff just seems to spring right up even in places you'd never expect.

        Comment

        • #5
          bohoki
          I need a LIFE!!
          • Jan 2006
          • 20815

          i would wipe them individually a tumbler may loosen the priming compound

          Comment

          • #6
            Bullitt01
            Veteran Member
            • Sep 2013
            • 3905

            Well, there really isnt any good ones. They are all 'fuzzy'. And yes, it may be just mold. Should i try spraying a few with a bleach/water soulition?

            Could that harm them (any worse)

            Comment

            • #7
              Jeepers
              Veteran Member
              • Sep 2009
              • 3415

              wipe some down and see if they still shoot, powder may already be contaminated ... 22lr's dont seal very well with lead(assuming they are lead and not copper seeing you have mold) so spraying them down with anything may not the best choice ....
              Originally posted by Ronald Reagan
              Before I refuse to take your questions, I have an opening statement.

              Comment

              • #8
                Bullitt01
                Veteran Member
                • Sep 2013
                • 3905

                Very good point, thanks! Will try that.

                Comment

                • #9
                  11HE9
                  Senior Member
                  • May 2011
                  • 771

                  Originally posted by Jeepers
                  wipe some down and see if they still shoot...
                  This ^^^


                  Then spray some WD-40 on a shop towel and give the rounds a good cleaning?

                  Comment

                  • #10
                    thenodnarb
                    Veteran Member
                    • May 2009
                    • 2603

                    I would sell them .05 each and buy a new case using the ammo finds thread. you'll probably replace the case inside of a month. And I KNOW there are fools out there that will want that ammo in any condition, especially at that price.

                    How I Powder Coat Pistol Bullets
                    How I Powder Coat Rifle Bullets

                    Comment

                    • #11
                      Bullitt01
                      Veteran Member
                      • Sep 2013
                      • 3905

                      I dont think i would want to do that to anyone. These may not even shoot...just go *poof*

                      Comment

                      • #12
                        Chaos47
                        Calguns Addict
                        • Apr 2010
                        • 6615

                        Lead nose 22LR generally is actually coated with wax or tallow or some combination.
                        I wonder if its just mold like you and others have said. I'd just wipe them with a cloth and try them out.. preferably in a bolt action rifle or a pistol like the Ruger MK (because the ability to remove the bolt and have straight access to the barrel to hammer out the round if you have to)

                        Comment

                        • #13
                          Rawk
                          Junior Member
                          CGN Contributor
                          • Apr 2014
                          • 32

                          How fuzzy are we talking here?

                          Comment

                          • #14
                            Bullitt01
                            Veteran Member
                            • Sep 2013
                            • 3905

                            Not Real fuzzy. They dont look like broccoli. Just light fuzz.

                            Comment

                            • #15
                              Gryff
                              CGSSA Coordinator
                              • May 2006
                              • 12686

                              Leave them as is and put up for sale in the marketplace for $500.
                              My friends and family disavow all knowledge of my existence, let alone my opinions.

                              Comment

                              Working...
                              UA-8071174-1