Savage Model 19 NRA

[Jarhead]

How do you remove the Mag?

[swifty]

There should be magazine release, either in front of, or behind the mag. Just a flat piece of spring steel. If the 'button' is broken off, then you may need to look up inside from the bottom. Push the release away from the mag.

[Jarhead]

Another picture

Savage 19 NRA

[Jarhead]

Bottom View, no mag release

[swifty]

That little silver nub behind the mag, pull it to the rear. The mag itself may need nudged forward at the same time.

[Jarhead]

Does she have the wrong Mag, I have been shooting one round at a time. Got her as a throw in, was all rusty and stock looks refinished but would like to fix the Mag issue.

No nub behind the Mag

[swifty]

I see the nub in a couple of your pics, that should be the top half of the release, while the bottom half is gone. The nub is above that rib on the back of the mag, that gap above the rib is actually a notch.

There are several variations of the M19, and a couple of magazine variations also.

[Jarhead]

I see the nub in a couple of your pics, that should be the top half of the release, while the bottom half is gone. The nub is above that rib on the back of the mag, that gap above the rib is actually a notch.

There are several variations of the M19, and a couple of magazine variations also.

Dah .......Got it, release looks broken, can I still find a replacement?

[swifty]

See, told ya so!

Keep that part, don't lose it. Check Numrich, you will need to determine what rifle you actually have, the variation it is.

[Jarhead]

See, told ya so!

Keep that part, don't lose it. Check Numrich, you will need to determine what rifle you actually have, the variation it is.

Thanks, found and ordered the part from Numrich ........now I need a spare Mag

[covingtonhouse]

Thanks, found and ordered the part from Numrich ........now I need a spare Mag

Numrich should also have the mags. If they don't Brownell's should. I believe it's the same mag as a model 6,85,and 416.

[swifty]

Check your serial number, if it's under 25,000 then you should have the model 19 Old Style.

[covingtonhouse]

Actually by the pics, it does look like you have the wrong mag. The mag you have looks like maybe a model 64 type mag. The mag for the model 19 should have a round knob on the floorplate.
another good source of info is over at rimfire central.
Or 24hourcampfire

[swifty]

IIRC, it's the Model 19NRA and Model 19-33 have that knob.

[Jarhead]

Actually by the pics, it does look like you have the wrong mag. The mag you have looks like maybe a model 64 type mag. The mag for the model 19 should have a round knob on the floorplate.
another good source of info is over at rimfire central.
Or 24hourcampfire

This is what I have