AR dedicated rifle?

[Tom-ADC]

If you have a built AR type dedicated 22 rile does it still require a bullet button?
Ten round magazines only.
I went thru the chart but it seems centerfire only.
Bad camera phone picture!!

[Tom-ADC]

Did a better search, must have been to early in the morning before coffee!!
Bullet button not required on 22LR. That and I missed #6 on the flow chart.

[CSACANNONEER]

You can also use any magazine you legally own or can legally borrow from someone who remains in the immediate area.

[Tom-ADC]

Little better a Spikes ST-22 on a NFA lower.

[nastyhabts26]

You may still need it if you are using a multi caliber lower receiver.
If it is stamped .22 Rim fire you will be ok

[Tom-ADC]

You may still need it if you are using a multi caliber lower receiver.
If it is stamped .22 Rim fire you will be ok

I just checked its a multi cal. lower? Now I'm confused again.

[big ron]

You may still need it if you are using a multi caliber lower receiver.
If it is stamped .22 Rim fire you will be ok

you are WRONG!!!!! you will only need the b button if you put a center fire upper back on your lower.

[Merc1138]

You may still need it if you are using a multi caliber lower receiver.
If it is stamped .22 Rim fire you will be ok

What? He could have "Plasma, 40 watt range" stamped on the lower and it doesn't make a difference. Stop spreading FUD.

[Chaos47]

Don't listen to nasty.
The law is clear if its not a semiautomatic centerfire rifle then its not an AWB rifle. There is nothing in the law to support his multi cal marking idea.
As big ron said it would require a semiautomatic centerfire upper/bolt placed onto it to make it centerfire.

[CSACANNONEER]

You may still need it if you are using a multi caliber lower receiver.
If it is stamped .22 Rim fire you will be ok

You've been here too long to be spreading this kind of FUD. What's wrong with you?

[xxINKxx]

Rimfire is still currently exempt from AWB. You can have all the evil features you want as long as it meets the 30" overall length and has a 16" barrel, 10 rnd mag (unless you legally owned high caps befor the mag ban from back in 2000)

[Merc1138]

Rimfire is still currently exempt from AWB. You can have all the evil features you want as long as it meets the 30" overall length and has a 16" barrel, 10 rnd mag (unless you legally owned high caps befor the mag ban from back in 2000)

26", not 30".

[Tom-ADC]

Thanks all I'll put it in the proper configuration soon. Any I'll have a Bullet button for my new build.

[Tom-ADC]

Okay , I have a little Tasco red dot that used to sit on a S&W 22A think I'll put it on my AR 22. Should be okay for plinking was good on the S&W.

[Merc1138]

Okay , I have a little Tasco red dot that used to sit on a S&W 22A think I'll put it on my AR 22. Should be okay for plinking was good on the S&W.

You might need a riser for it.