Airsoft Thompson Mag Mod for 10/22 Fun Gun

[joelogic]

I got the idea from another calgunner so I am not taking credit only posting my experience.

You will need a Thompson Airsoft mag, Ruger rotary mag, Dual mag holder, rotary tool, and epoxy.

http://www.brownells.com/magazines/rifle-magazines/magazine-parts/magazine-hardware/ruger-10-22-quad-clip-dual-clip-holder-prod25155.aspx

First, I cut the Thompson mags down so they were less cumbersome.



Second, Grind down the logo on the bottom of the rotary mag so that the dual holder can sit flush. This is really more for aesthetics. If you do not grind it down there will be a small gap. I also took some off the holder.



Grinded.


Not Grinded.

[joelogic]

Once you are satisfied with the seating, clean the mag and holder thoroughly. Apply epoxy, seat mag to holder firmly and allow to set up.

You can either screw the holder to the Thompson Mag or Epoxy. I chose epoxy.


All I had was a silver 10/22.

[renardsubtil]

The extra grip that the extended mag provides for removing/inserting the magazine makes this a great mod imho.

Now all you need is an original Lyman 1928a1 rear ladder sight!