Loose Barrel

[huntandski]

How can I tighten the barrel on my Savage Mk II? It seems like the barrel and the part stock are getting loose. I'm sure there is some allen wrench screws or something I need to tighten. Any advice would be nice.

[swifty]

Check the screws for tightness, located on the bottom of the stock

[Izzy43]

As "swifty" said there are two action screws that hold the action/barrel in the stock. If you don't have a torque wrench calibrated in in/lbs (16 in/lbs seem to be the magic torque on the savage) then just snug up the bolts and add 1/4 turn and re-check after each shooting trip. Don't over tighten especially on a wood stock as it can split the wood.