Unconfigured Ad Widget

Collapse

First time at the range with my Marlin 795

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • xbuilder9mm
    Member
    • Dec 2011
    • 266

    First time at the range with my Marlin 795

    We took my new Marlin to the Los Angeles Gun Club Range today. It was a great experience. First of all, we took the Marlin, a Saiga, a 30.06 Remington, 2 9mms. Plenty of ammo at the range at great prices. Everybody was really friendly. It was the first time I fired the Marlin. What a great experience, it never misfired. It was really smooth. we were all amazed how we all shot nice groupings. I put a Walmart cheapy scope $ 16.99 on it, didnt even adjust it. I put the first magazine in the gun, I kept pulling on the bolt and nothing was happening until my son figured out that you push on the little lever at the bottom and it loads automatically and then pure fun. I really recommend this weapon for alot of fun.
  • #2
    JNunez23
    Veteran Member
    • Jan 2012
    • 2755

    Congrats on the new rifle.
    sigpic"Be more concerned with your character than your reputation, because your character is what you really are, while your reputation is merely what others think you are."
    John Wooden

    Need a holster?, please email us at StrappedKydex@gmail.com for any holsters, mag carriers, and more. Custom jobs welcomed!

    Comment

    • #3
      Chaos47
      Calguns Addict
      • Apr 2010
      • 6615

      Congrats!

      Did you ever figure out your rear sight issue?

      BTW Marlin 795 have 2 bolt hold open devices.
      The Last Shot Hold Open like you encountered and a manual one.
      The bolt handle has a nub on it and the receiver has a corresponding hole in the receiver. So if you pull it to the rear and then push it inwards it will hold open.

      These 2 bolt hold opens are independent of eachother, so if you manually lock it the LSHO lever will not release it. Just something to know about keep in mind if it ever locks back and will not release.

      Comment

      • #4
        xbuilder9mm
        Member
        • Dec 2011
        • 266

        rear sight issue

        Thanks for asking. I think it is just a bad design. The slotted plate is held in the front by two tabs, that I think with enough opening and closing they will brake off. At best becomes like a pivot because there is nothing holding the plate at the back. So I ended up getting a $ 16.99 scope at wallmart, which for these tired eyes was a great solution even if the sight had been working great. Everybody that came to the range with me (5) got 2" groupings.

        Comment

        • #5
          xbuilder9mm
          Member
          • Dec 2011
          • 266

          Ps. I did not see your hold open advise - thanks I am going to try it right now!!!

          Comment

          • #6
            tommyboy619
            Senior Member
            • Feb 2012
            • 889

            Congrats on the Marlin. Mine was a tack driver right out of the box. Make sure to check out the Marlin 795 Mega Thread Part Deux. Lots of good info. The one upgrade I made that was worth the money was upgrading the sights to the Williams FireSights. Much easier to pick up indoors and outside.
            "Pride costs us more than hunger, thirst, and cold." - Thomas Jefferson

            Comment

            • #7
              Caneman
              Member
              • Feb 2013
              • 114

              took mine out today for the first time... extremely fun rifle to shoot, i put on the fire sights and i coughed up the money for the mcarbo trigger kit, also polished the seer/hammer contact area... great rifle very satisfied

              Comment

              Working...
              UA-8071174-1