Unconfigured Ad Widget

Collapse

CZ457 Scope install

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • newStar
    Member
    • Jan 2021
    • 138

    CZ457 Scope install

    Can "Vortex CM202 Sport Cantilever 30mm Ring Moun" be directly installed on its Dovetail? Or it needs a CZ 457 scope base to convert to Picatinny rail?
  • #2
    ar15barrels
    I need a LIFE!!
    • Jan 2006
    • 57199

    The Vortex CM202 is a picatinny mount.
    You will need a picatinny rail on your rifle in order to use that mount.
    That mount looks to be AR-height which will likely be too tall for the stock on the 457 especially after you adapt the receiver to picatinny.

    You would do better to obtain proper rings that direct mount to your receiver dovetails such as these:
    Last edited by ar15barrels; 12-22-2025, 1:38 PM.
    Randall Rausch

    AR work: www.ar15barrels.com
    Handguns: www.handgunbarrels.com
    Bolt actions: www.700barrels.com
    Foreign Semi Autos: www.akbarrels.com
    Most work done while you wait on a scheduled shop visit.

    Comment

    • #3
      newStar
      Member
      • Jan 2021
      • 138

      Thank you very much for the information. I am sorry I overlooked this message.

      Comment

      • #4
        Garbcollector
        Senior Member
        • Feb 2013
        • 2486

        Check area 419 they make a pic rail for the 457 just add your own rings. I have the 30 moa model along with the bolt knob and muzzle break

        If you are looking for a rail for your CZ455, please click >> HERE
        Last edited by Garbcollector; 03-02-2026, 1:10 PM.

        Comment

        • #5
          newStar
          Member
          • Jan 2021
          • 138

          I will pick up my CZ 457 MTR next Monday (still in 10 days waiting). Here are my plan:
          • use Pillar PP457‑0 to convert 11 mm dovetail to Picatinny
          • use Vortex Pro Series Low (PR30‑L) rings
          • Vortex Strike Eagle 1–8×24 scope

          So, I should have
          • Rail (PP457‑0): ~0.35" above receiver
          • Rings (PR30‑L): 0.90" above rail
          • Total (receiver to scope center): ~1.25"
          Hope this can work with my CZ 457. My big concern is that if it is high enough to operate my bolt. Any information will be appreciated.
          Last edited by newStar; 02-27-2026, 2:06 AM.

          Comment

          • #6
            newStar
            Member
            • Jan 2021
            • 138

            Originally posted by ar15barrels
            The Vortex CM202 is a picatinny mount.
            You will need a picatinny rail on your rifle in order to use that mount.
            That mount looks to be AR-height which will likely be too tall for the stock on the 457 especially after you adapt the receiver to picatinny.

            You would do better to obtain proper rings that direct mount to your receiver dovetails such as these:
            https://www.midwayusa.com/product/1022838660
            Sorry I have ordered a "Pillar PP457‑0 to convert 11 mm dovetail to Picatinny" already before I saw your message. Your solution is very cost saving and only priced around $30. Now if I want to make use of the PP457-0 ($40), I may have to order a "Vortex Pro Series Low (PR30‑L) rings" to be used with PP457-0, which is another $80. Not sure if that gives me any better than your solution to rings that direct mount to the receiver dovetails.
            Last edited by newStar; 02-27-2026, 10:48 AM.

            Comment

            • #7
              Imageview
              Senior Member
              • Jul 2018
              • 1632

              I prefer a pic rail like the one you mentioned to dovetail rings that randall suggested, but that may be because the dovetail rings I have tried in the past were absolute garbage. Either solution works with reasonable quality components, just need to find what height rings your particular optic and rifle combination will accommodate.

              Comment

              • #8
                newStar
                Member
                • Jan 2021
                • 138

                Originally posted by Imageview
                I prefer a pic rail like the one you mentioned to dovetail rings that randall suggested, but that may be because the dovetail rings I have tried in the past were absolute garbage. Either solution works with reasonable quality components, just need to find what height rings your particular optic and rifle combination will accommodate.
                Ok. I will go that route to add pic rail. Hope the total height can fit into my Stike Eagle scope. Thanks

                Comment

                Working...
                UA-8071174-1