I'm trying to decide which one I should upgrade first. Trigger wise I was thinking of a Kidd trigger and barrel wise I was thinking GM
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
1022 upgrade barrel or trigger
Collapse
X
-
Barrel. Trigger can be improved with a $30 hammer, and some filing/do it yourself.sigpic"Be more concerned with your character than your reputation, because your character is what you really are, while your reputation is merely what others think you are."
John Wooden
Need a holster?, please email us at StrappedKydex@gmail.com for any holsters, mag carriers, and more. Custom jobs welcomed!
-
Trigger, get the KIDD trigger- any one of them, you won't regret it.
Then compare your KIDD trigger to others people's 10/22, for feel, smoothness, and pull weight. You'll win every time.
Once you get the KIDD trigger, you can start testing barrels. You'll find the factory Ruger barrels are pretty good in accuracy, and more reliable (w/ bulk ammo) than most match/target barrels.Comment
-
It depends on your goal for the rifle. If you're going for a target rifle then start with good target/match barrel and an $80 2.5-3lb Clark Custom trigger job. Later you can switch to an awesome Kidd 2-stage trigger, but a $300 Kidd trigger in a rifle with a factory barrel is like putting racing slicks on a Toyota Prius. You'll need a target/match barrel to get really tight groups and target/match ammo to take full advantage of the barrel. You can't expect stellar accuracy out of completely inconsistent bulk ammo. What you'll give up is the ability to use hyper-velocity ammo.
If you're going with a tricked out plinker then just get a nice trigger job done and possibly a lightweight barrel like a Whistle Pig.
Again it all depends on what you plan to do with your rifle.Last edited by sholling; 05-14-2012, 7:49 AM."Government is the great fiction, through which everybody endeavors to live at the expense of everybody else." --FREDERIC BASTIAT--
Proud Life Member: National Rifle Association, the Second Amendment Foundation, and the California Rifle & Pistol AssociationComment
-
I did Barrel first then Kidd trigger which is way better then any other drop in on the Market. Whistlepig Barrels are great BTW
TURNING and turning in the widening gyre
The falcon cannot hear the falconer;
Things fall apart; the centre cannot hold;
Mere anarchy is loosed upon the world,
The blood-dimmed tide is loosed, and everywhere
The ceremony of innocence is drowned;
The best lack all conviction, while the worst
Are full of passionate intensity.
William Butler Yeats 1865-1939Comment
-
do the barrel, there are tons of write-ups on doing you own trigger, you can seriously make your stock trigger as good as the fancy expensive ones. It takes some work and patience, but if you mess it up then go buy the fancy replacement parts.Comment
-
Trigger first. Most likely the barrel is more than accurate enough. Trigger job can easily be done and you would want one anyway. I don't know if they still sell this stuff but I bought a set of over sized trigger/sear and hammer pins to remove the slop. Some careful stoning the sear/hammer got me a really nice 3.5lb trigger job.
What really helped was an over-travel stop. I put a little bit of bedding compound behind the trigger to create a stop. Please stop replying with 'training with trigger straight back' stuff... we know!
Ruger factory barrels are pretty good already. Several I've seen shot less than 1" groups at 50 yards with good ammo. Permanent bedding job on a 10/22 is tricky but will probably improve accuracy more than you think. You can use painter's tape or some thin felt material to remove the wiggle in the receiver and stock fit temporarily and you might see improvement in accuracy before permanently bed it.GCC
NRA Certified Pistol Instructor
Don't count your hits and congratulate yourself, count your misses and know why.Comment
-
I did barrel first then trigger. For $30 you can get the Volquartsen hammer. Haven't measured the pull, but it is definately lighter and I love it. As far as barrels goes, I bought a Whistle Pig barrel and it was really disappointing. While cool looking and lightweight, it was real finicky with almost all the ammo I brought to the range yesterday. Would only cycle certain ammo, match ammo was fine, but accuracy with all ammo was no better than my E.R. Shaw heavy bull barrel on my other 10/22 and that fires EVERYTHINGComment
-
Get the barrel first, then replace the stock, then get the kidd you will love it when it is done. My stocks are already pillar and fully glass bedded.
gun stock 009.jpg784.jpg
787.jpgComment
-
Stock was the first thing I replaced, I put an archangel target stock deluxe on it. Kinda wishing I would have gone with a Boyd's blaster stock instead but oh we'll I can make that another project now can't I
Well I know I'm going to upgrade both the trigger and the barrel it's just a matter of which one to do first. Regarding the trigger what do you guys find is a good Trigger pull set up for the Kidd 2 stage trigger?
I'll mainly be shooting this gun from the bench

Originally posted by MrPlinkIf you suck with irons you will suck with optics. The difference is the aimpoint will allow you to suck faster and a scope will give you a closer look at how much you suck.Comment
-
i'd choose to go with the trigger first.
a good trigger is a MUST for any rifle you expect accuracy from.NRA life member, US Army Veteran
i am a legend in my own mind...
we are told not to judge muslims by what a few do...yet, the NRA membership and firearms owners are ALL considered as radical...


"The second amendment ain't about your deer rifle..."Comment
Calguns.net Statistics
Collapse
Topics: 1,870,920
Posts: 25,177,503
Members: 358,862
Active Members: 5,395
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 34194 users online. 135 members and 34059 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment