sig mosquito drop in trigger upgrade?

[nickel_1022]

My wife really likes her mosquito, but the trigger pull is pretty heavy. Anybody hear of a drop in trigger for this pistol? By the way probably 500 rds through this thing with the cci mini mags and have had no problems.
Thanks for any imput.

[nickel_1022]

Wow lots of views and no news, ok so I hear that you can polish the sear and other part touching it, sorry can't think of the name.... If I were to polish where those parts, what type of compound would I want to use?

[straykiller]

i hear of people using flitz for polishing feed ramps but mostly when it comes to trigger jobs ive seen people using polishing stones. you can find them on brownells and i know you have to be very careful and go slow so you do not change the angle of the sear or remove too much material. hope this helps a little bit, when you end up doing it take a lot of pictures so we can all see it here.

[nickel_1022]

sounds good, probably gonna be a minute before i get to it but i will repost.

[nickel_1022]

found a video on youtube about a "complete reassembly of the sig mosquito". in the video you can see how to easily get rid of the lock out assembly, in fact it took me longer to watch the video than to take down the gun, remove the two parts and reassemble. super easy

[AlbcAlbrr]

You could sent it to Bill Springfield.

Mosquito

Double and single action pull weight reduced up to 20%, magazine disconecter is removed. SA trigger creep reduced to a smooth clean break.

Price runs $59, only the lower frame is needed.

Trigger Works

[kwansao]

Don't polish he sear... Polish the trigger bar and remove the magazine disconnect...

[santamonica9]

waiting for pics please

[nickel_1022]

Yeah probably gonna stick to that trigger safety thing and just polish the trigger bar.
Have to see what my wife thinks. Taking out the lock out thing seemed to make a little bit of difference. To anybody reading this please find that sig mosquito video i mentioned on youtube above..you can see where he polished his trigger bar and how to remove that trigger lock thing.

[misin4mati0n]

You could sent it to Bill Springfield.

Mosquito

Double and single action pull weight reduced up to 20%, magazine disconecter is removed. SA trigger creep reduced to a smooth clean break.

Price runs $59, only the lower frame is needed.

Trigger Works

I had Bill Springfield work on the triggers in my 1911, XD , and CETME. He does great work and was a pleasure to deal with. I have a mosquito on the way and next time I am in CO Springs I will be taking it to be worked on.