s&w 15-22 w/rra match -problem

[sootytom]

I just installed a RRA match trigger in my new S&W 15-22 moe,now the trigger is not resetting correctly 100% and it's shooting 2-3 rnd burst regularly
I'm going to install the trigger in a 223 lower and see if it's working properly
Anybody using a RRA match trigger on a S&W 15-22,hows it working?
did you have change the springs?
thanks

[davek8s]

I had a similar problem. I was getting 3-4 round bursts and it was firing with the safety on.
Turned out it was 1 of the pins for the trigger. I didnt push it all the way in. Hopefully thats all it is.

[damon1272]

I had the same issue with a rra match trigger. Replace it with the factory one. Install some JP springs for a few bucks and call it good.

[donw]

send it back.

i suggest the same as damon1272 suggests.

i did my Spikes tactical ST-22 M4 trigger with the JP springs, lubed it and it went down to a smooth, 4 lb trigger from a 6.5 lb trigger...cost $11.00 and a few minutes to install.

[sootytom]

probem solved!!
When I installed the trigger I used the rifles trigger pins that's what was causing the problem
I replaced them with the oversized pins that came with the trigger, the gun is shooting great now and the rra match trigger makes the s&w 15-22 moe a fun gun
I've got it set up just like my ddm4 so it's going to be a great,cheap training gun