Unconfigured Ad Widget

Collapse

how to cleaning a mosquito

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Domingo
    Senior Member
    • Sep 2010
    • 1297

    how to cleaning a mosquito

    Im looking for some advise on how to clean a mosquito
    I bought one a couple months ago and put arround 2000 plus
    rounds trew it after every range outing I get home clean the barrel
    brush or snake bore but I have not taken the hole gun apart say the triger
    assembly hammer and clean that should I do that or thats somenthing
    the does not realy need it any advise will be apreciated. is it easy to do any pointers. thanks Domingo
  • #2
    CALI SHOT DOC
    Senior Member
    • Nov 2010
    • 771

    I wouldn't. The farthest i have broken down my mosquito is barrel off and the grips off. It's not very easy. I had the spring for the slide lock lever pop out and it took me about an 45min to find the spring and another hour to put it back in cause there isn't much room to put your hands in there.
    sigpic In order to succeed, you can't be afraid of failure.

    Comment

    • #3
      sw99
      Junior Member
      • Nov 2010
      • 78

      have you checked out the advice on the Sig web site...

      Comment

      • #4
        Tzvia
        Senior Member
        • Apr 2006
        • 602

        I agree with CALI SHOT.

        I took the mag release out once and almost lost a small spring. It was a pain to put together. So I just do the slide off the frame, clean the barrel, scrub with nylon brush. If needed, I flush the frame with MPro-7, wipe dry then drip a small amount of oil in the hammer/trigger mech before lubing the rails.

        Had mine since '07 and put a lot of rounds through it and it eats Blazer without a bobble. Aint broke, don't fix.
        Tzvia

        RIP Kelev my sweet Lab (and avatar). The best dog in the known universe. Thank you for 14 wonderful years. I will see you again one day.

        Comment

        • #5
          Domingo
          Senior Member
          • Sep 2010
          • 1297

          thank you good to know
          now what about a triger job
          any gunsmith in north cal east bay

          Comment

          • #6
            m1a1driver
            Senior Member
            • Feb 2009
            • 1031

            yea getting that slide release lever spring back in was a ****... I had to send it back to sig, they were nice and fixed it and cleaned the gun free of charge, even after the 2 year warranty...

            Comment

            • #7
              baz152
              Member
              • Feb 2008
              • 311

              I would pull off the wings and then use a real small cutting tool to open up the thorax and remove the guts. I would not eat it though because you do not know who's blood it may have sucked.

              Comment

              • #8
                santamonica9
                In Memoriam
                • Mar 2009
                • 1475

                Originally posted by baz152
                I would pull off the wings and then use a real small cutting tool to open up the thorax and remove the guts. I would not eat it though because you do not know who's blood it may have sucked.
                I mainly shoot .22lr, 9mm,45 acp, 357 & 38, 12G, 7.62x39, .308, .223/556, 7.62x54r, 300 win mag, 8x57
                God Bless USA

                Comment

                Working...
                UA-8071174-1