I received this CMMG upper from CMMG a while ago (Shadow65 Thanks!). Last weekend I got the chance to sight it in and test the accuracy.
The lower is the Calguns lower with G&R LPK. The upper I ordered has the following upgrades:
M4 LE Upper with F front sight base
Anodized Upper
Stainless bolt upgrade
Stainless Collar
Free Float Tube
Bolt Hold Actuator

The scope is Bushnell Elite 3200 Tactical 10x40 mil-dot .1 Mil from MidwayUSA, mount is burris PEPR 1" QD mount.

I shot about 80 rounds of Winchester X Super X, 400 rounds of CCI Mini-Mag 40 Grain, 25 rounds of Wolf target.

Overall I had about 10 Fail-to-Feed, mostly the first round in the magazine. Later I figured out the spring in the Black-Dog Magazine is not strong enough to push the first round high enough because of the BHOA (Bolt Hold Open Actuator). After I remove the BHOA, I have zero-issue in feeding the rounds.

There was one stove-pipe which I can't figure out how that happened. Supposedly the upper comes with the anti-jamming charging handle. I had to field stripe the rifle to get the brass out.

With mil-dot and mil adjustments, it's easy to zero the scope at 50 yards. The wind speed is about 3-5 mph, on and off. These are the best targets I shot at 50 yards shouldering the butt and sandbagging the front. The CMMG shots better than I am!
Wolf Target 50 yd, 10x, 5-shot group

Mini-Mag 50 yd, 10x, 5-shot group
<hitting the 6-image limit, I have to include them in the next post>
Impressions/Afterthoughts:
The Stainless upgrade makes the cleaning a bliss!
The CMMG free float tube may be tactical-uncool, but is adequate to free-float the barrel, a twenty dollar well spent!
I have to replace the trigger, it felt like a ton after ~500 rounds.
This CMMG is a keeper!
The lower is the Calguns lower with G&R LPK. The upper I ordered has the following upgrades:
M4 LE Upper with F front sight base
Anodized Upper
Stainless bolt upgrade
Stainless Collar
Free Float Tube
Bolt Hold Actuator
The scope is Bushnell Elite 3200 Tactical 10x40 mil-dot .1 Mil from MidwayUSA, mount is burris PEPR 1" QD mount.
I shot about 80 rounds of Winchester X Super X, 400 rounds of CCI Mini-Mag 40 Grain, 25 rounds of Wolf target.
Overall I had about 10 Fail-to-Feed, mostly the first round in the magazine. Later I figured out the spring in the Black-Dog Magazine is not strong enough to push the first round high enough because of the BHOA (Bolt Hold Open Actuator). After I remove the BHOA, I have zero-issue in feeding the rounds.
There was one stove-pipe which I can't figure out how that happened. Supposedly the upper comes with the anti-jamming charging handle. I had to field stripe the rifle to get the brass out.
With mil-dot and mil adjustments, it's easy to zero the scope at 50 yards. The wind speed is about 3-5 mph, on and off. These are the best targets I shot at 50 yards shouldering the butt and sandbagging the front. The CMMG shots better than I am!
Wolf Target 50 yd, 10x, 5-shot group
Mini-Mag 50 yd, 10x, 5-shot group
<hitting the 6-image limit, I have to include them in the next post>
Impressions/Afterthoughts:
The Stainless upgrade makes the cleaning a bliss!
The CMMG free float tube may be tactical-uncool, but is adequate to free-float the barrel, a twenty dollar well spent!
I have to replace the trigger, it felt like a ton after ~500 rounds.
This CMMG is a keeper!

Comment