Ruger 10/22 front sight issues

[map]

Anyone experiencing any issues with their Ruger 10/22 front sight? Mine fell off while shooting. I can attach it back on but it moves to the lest which throws my shots off to the right.

Any suggestions on how to fix this issue? I have a standard carbine model.

Thanks

[G-forceJunkie]

Are you saying it slid out of the dovetail? If so, you can tighten up the dovetail by gentaly tapping down the edges of the dovetail with a punch and hammer, or putting a bunch of center punches on the bottom of the site to upset some metal. I would also use some loctite to keep it in place.

[map]

Are you saying it slid out of the dovetail? If so, you can tighten up the dovetail by gentaly tapping down the edges of the dovetail with a punch and hammer, or putting a bunch of center punches on the bottom of the site to upset some metal. I would also use some loctite to keep it in place.

Yes, that's what I'm saying. Thanks for the input!

[Tom-ADC]

Put a shim under it, then you can still tap it for widage. I cut the tip off a feeler gage for my Sharps.