Unconfigured Ad Widget

Collapse

Bolt release mod

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • akjunkie
    CGN/CGSSA Contributor - Lifetime
    CGN Contributor - Lifetime
    • Jan 2005
    • 3497

    Bolt release mod

    Just did the mod to my 10/22 after watching several youtube videos.
    I dont have the Daimond dremel bit so i used some small files.

    After several attempts i gave up.

    I followed this instruction.



    Then I find out about this. Different specs with polymer trigger assy.



    Have a feeling I filed or altered to much on my bolt release.

    Will this part work on the NEWER polyer trigger assemblies?

  • #2
    oldschool88
    Senior Member
    • Sep 2008
    • 787

    I have the Volquartsen bolt release in my 10/22 and it works great. I also have the plastic trigger assembly on my rifle. Easy to install and I've never had an issue.


    Comment

    • #3
      G-forceJunkie
      Calguns Addict
      • Jul 2010
      • 6529

      I had an issue doing the mod on an older, aluminum trigger group 10/22. The issue turned out to be the mag release. The front edge of the bolt hold open was getting pressure applied right on the lower portion you press up to lock the bolt back, right infront of where that lower pin goes through. It would not let the bolt release when pulled back on. Once I saw where it was making contact with the plastic mag release, I used a razorblade to shave s small amount from the mag release, untill it no longer contacted the bolt hold open. See if that is your problem.

      Comment

      • #4
        akjunkie
        CGN/CGSSA Contributor - Lifetime
        CGN Contributor - Lifetime
        • Jan 2005
        • 3497

        One of Midwayusa's customer reviews.


        "This, like every other Volquartsen product I've used, works great. NOTE: doesn't work well with plastic extended mag releases. it rubs the side, and doesn't retract, but works great with aluminum mag releases."

        guess i'll take another crack tomorrow morning.

        Comment

        • #5
          nagorb
          Veteran Member
          • Jul 2008
          • 4355

          I have the newer model and I modded mine and it works fine. If you can, post a pic of your bolt release.

          Comment

          Working...
          UA-8071174-1