Unconfigured Ad Widget

Collapse

Taking the barrel off a 10/22?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Knight_Who_Says_Ni
    Member
    • Jun 2010
    • 399

    Taking the barrel off a 10/22?

    I am cleaning a family members 10/22 at the moment, and cannot get the barrel off for the life of me. This is the first time its been cleaned, and its a pretty new gun, the barrel clamp is off
  • #2
    doc1buc
    Senior Member
    • Oct 2008
    • 1670

    Make sure the retention screw is out, underneath the stock, and you need to be sure that the safety button is engaged half-way between "fire" and "safe" for the receiver/barrell to be removed from the stock.
    Support your local Gun-store:

    Ammunition Supply Point
    Vacaville, CA
    707-448-8662
    Great Owners, nice selection of firearms!
    OLL AR

    Comment

    • #3
      doc1buc
      Senior Member
      • Oct 2008
      • 1670



      Take your pick, I can't stream video at work.
      Support your local Gun-store:

      Ammunition Supply Point
      Vacaville, CA
      707-448-8662
      Great Owners, nice selection of firearms!
      OLL AR

      Comment

      • #4
        trob
        Senior Member
        • Apr 2009
        • 1881

        Take penetrating oil and put a few drops on the barrel from inside the receiver. Then use rubber dish-washing gloves and put the receiver between your legs. then just twist.

        I ALWAYS have problems getting barrels off. Ive stuck them in the freezer, tried tapping it out with the bolt, etc. The only method that works 100% of the time is penetrating oil and dish washing gloves (or other rubber gloves).

        Comment

        • #5
          toby
          Banned
          • Jan 2010
          • 10576

          Lay that sucker on a wood table or ?then have someone hold the receiver tight and smack the barrel at midway in the direction of the muzzle with a big rubber mallet. a few times
          Last edited by toby; 10-06-2010, 6:40 PM.

          Comment

          • #6
            nagorb
            Veteran Member
            • Jul 2008
            • 4355

            hi im new to the forum and i just got a green mountain bull barrel however i cant remove the factory barrel...i removed the two screws and the v cap but the darn thing is stuck in there way too tight...only thing i can think of is using some sort of leverage but i cant find any way to place any...

            Comment

            • #7
              X-NewYawker
              In Memoriam
              • May 2008
              • 5993

              Blue or stainless?
              The Stainless barrels are VERY tight -- I had to POUND one out of the receiver with a wooden block and a hammer. Every Stainless 10-22 I moded out had the same thing -- insanely tight barrel.

              Comment

              • #8
                ojisan
                Agent 86
                CGN Contributor
                • Apr 2008
                • 11778

                ^ Yup...I use a wooden dowel to drive out the worst ones.

                Originally posted by Citadelgrad87
                I don't really care, I just like to argue.

                Comment

                • #9
                  damon1272
                  Veteran Member
                  • Aug 2006
                  • 4857

                  Must be nice. Mine just slid out. I cleaned everything up and epoxied it in for good. shot much better after that.

                  Comment

                  • #10
                    Knight_Who_Says_Ni
                    Member
                    • Jun 2010
                    • 399

                    It almost seems like the barrel has glue around it... Its just a standard blued barrel, I nust wanna get it off... I'm gonna try the mallet idea tomorrow...

                    Comment

                    • #11
                      Joe_13
                      Junior Member
                      • Jul 2008
                      • 87

                      I had to tap mine out with a hammer + wood block.

                      You could try popping it in the freezer, then warming the receiver with a torch.

                      Comment

                      Working...
                      UA-8071174-1