Colt 22lr question

[pennys dad]

Hi

So Im changing the furniture on my Colt. I have changed the butt stock and forearm stock with Magpul Moe's. I was going to change the grip to a Moe as well but the Colt's bolt hole's are in different spots. I checked against other Moe's and the screw hole placement was the same. So my question is, has anyone changed the grip on the Colt? If so to what?

Thx

[L4D]

Gotta drill the hole out or make a new hole. For the existing location.

It's do-able

[Enter_the_Dragon]

Ergo Grip - Black

I installed a Black Ergo grip a few months back. My apologies to L4D. I was supposed to post some photos of the hole I drilled for my grip. I will make it point this weekend to post the pictures.

I measured & measured and put the Ergo & stock grip side by side and I was off by 1/8" or a little more when I drilled the hole.

I used a silver sharpie marker to mark my hole, used a pointy hole punch to start my pilot hole, I suggest you start off with 1/16 drill bit and gradually use a drill bit that is the same thickness as the bolt that is screwed on to your M4 grip.

[IsaacGlass]

Just dremel or used a circular file to enlarge both openings little at a time and test fit as you go. I too when with the complete MOE setup.