Unconfigured Ad Widget

Collapse

Winchester 72A - Rear Sight Elevation?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SoCal Gunner
    Senior Member
    • Feb 2010
    • 1636

    Winchester 72A - Rear Sight Elevation?

    I have an Winchester 72A that was my father's and his father's.

    My son wanted to take it out to shoot the other day and I noticed the rear sight is missing an elevation adjustment mechanism.

    Looking for a little help here as internet searches are showing something different from my rear sight when I search for Winchester 72A rear elevator.

    Every website I've come across shows this version with the "slit" and step-type elevator.


    My version is solid and I suspect there should be a slider style?


    Any ideas on where to find the "right" rear sight adjustment for this sentimental rifle?

    Thanks for looking.
    .

    .

    California Reloading Club - IE Section
  • #2
    eternoplacer
    Member
    • Nov 2013
    • 330

    On yours the elevation adjustment is on the blade, if you notice it has a small screw locking the rear sight notched blade.
    Nice rifle!! a classic!

    The original Schematic shows the step elevator rear sight, it is posible your Grandfather changed it.
    Step adjustment is much faster finding a tiny screw driver.
    Last edited by eternoplacer; 01-22-2021, 3:47 PM.

    Comment

    • #3
      SoCal Gunner
      Senior Member
      • Feb 2010
      • 1636

      Originally posted by eternoplacer
      On yours the elevation adjustment is on the blade, if you notice it has a small screw locking the rear sight notched blade.
      Nice rifle!! a classic!

      The original Schematic shows the step elevator rear sight, it is posible your Grandfather changed it.
      Step adjustment is much faster finding a tiny screw driver.
      You rock! No I didn't notice and probably wouldn't have.

      I mentally convinced myself by the shape, it had to have a slider like on a mosin.

      Here's a closeup for others that stop in:

      It's totally possible that it was replaced sometime down the line. I know it wasn't in the last 40yrs though! Looking forward to taking it out and passing it down to my son.
      .

      .

      California Reloading Club - IE Section

      Comment

      • #4
        TRAP55
        Calguns Addict
        • Jul 2008
        • 5536

        That's a Marbles rear sight that didn't come on that gun. There's no adjuster because it's long for the gun and the adjuster was removed. The adjustment on the blade is for "fine tuning", the adjuster looks like this:
        Original and Reproduction Firearm Gun Parts Winchester Sight - Rear Elevator Marble double step RIFLE sight - This is the double step elevator for Marble's  rear RIFLE sight  (3 inches long.) Marble rear sights that are designed for the shorter barrel Carbine are 2 inches long and use use elevator part number st18.

        Comment

        • #5
          SoCal Gunner
          Senior Member
          • Feb 2010
          • 1636

          Originally posted by TRAP55
          That's a Marbles rear sight that didn't come on that gun. There's no adjuster because it's long for the gun and the adjuster was removed. The adjustment on the blade is for "fine tuning", the adjuster looks like this:

          https://homesteadparts.com/shop/sigh...l?cPath=87_167
          Thanks for the reply - makes sense - seeing it, if it were there, it would ride too far back.

          If I were to replace with an original, looking down at the rifle while aiming it, does the sight drift out Left to Right?
          .

          .

          California Reloading Club - IE Section

          Comment

          • #6
            TRAP55
            Calguns Addict
            • Jul 2008
            • 5536

            Yes it does. The factory sight is like the one you found, and the elevator sits inside the sight, and short enough not to hit the front of the receiver ring.
            There is a target version of the 72A with a peep sight mounted on the left rear of the receiver. The stock will have a cutout there, and holes tapped on the receiver for it. I couldn't see in your pics if that's what it was.

            Comment

            • #7
              eternoplacer
              Member
              • Nov 2013
              • 330

              Trap55 is right on, for the price of the adjuster in the link I would jump on it, no matter if the shiping costs more than the cost of the adjuster itself.
              That is a bargain!

              Comment

              Working...
              UA-8071174-1