Unconfigured Ad Widget

Collapse

Problems with Ruger 22/45

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary13
    Senior Member
    • Mar 2009
    • 1523

    Problems with Ruger 22/45

    Picked up a new 22/45 on Thursday. Checked it over and ran a dry patch down the barrel. Today I got it to the range and had quite a few jams and fte's using two different types of 22. It got better as I went along, but for a while there it was frustrating since I had problems shooting my old Model 60 last weekend. Since then I have thoroghly cleaned that and hope to shoot it soon.

    Have others had similar problems with their Ruger 22's?
  • #2
    Gary13
    Senior Member
    • Mar 2009
    • 1523

    I started with some new CCI High Velocity that I had just bought, and that gave me problems, so went to some old Winchester Wildcats that could I believe is at least 9 years old, and probably much more. It fed better, and seemed to be longer than the CCI. The Wildcats did better, but not perfect. I have a brick of Winchester Super X that I will try soon.

    Comment

    • #3
      Gary13
      Senior Member
      • Mar 2009
      • 1523

      Ran 150 rounds of the Winchester, some Super X and some Wildcat today, one fte. Tried the CCI again, and it would not run at all. Will probably just give it away, glad I only got 100 rounds.

      So it seems to be running better. Still having problems with my Marlin 60. Hard getting the first round to chamber, either jamming or just ejecting the round. Once I get one round chambered, most or all the rest are fine. Have cleaned it twice, any suggestions?

      Comment

      • #4
        BamBam-31
        CGN/CGSSA Contributor
        • Dec 2005
        • 5318

        Volquartsen Exact Edge Extractor should help w/ the 22/45 extraction problems.

        Here: http://www.rimfiresports.com/merchan...egory_Code=VC2
        Last edited by BamBam-31; 04-26-2009, 9:28 PM.
        sigpic

        Comment

        • #5
          Gary13
          Senior Member
          • Mar 2009
          • 1523

          I have not had this gun apart yet. How difficult is it to replace the extractor?

          Comment

          • #6
            BamBam-31
            CGN/CGSSA Contributor
            • Dec 2005
            • 5318

            Easy peasy. I did it, 'nuff said.
            sigpic

            Comment

            • #7
              WhiteHot
              Member
              • Apr 2009
              • 263

              Keep shooting it. Hang on the the CCI and try it after you have a few hundred more rounds through the gun.

              Comment

              • #8
                Gary13
                Senior Member
                • Mar 2009
                • 1523

                Originally posted by WhiteHot
                Keep shooting it. Hang on the the CCI and try it after you have a few hundred more rounds through the gun.
                That is what I am going to do for now. Have not cleaned it yet, will wait a bit longer. And thanks BamBam, I will consider doing that change.

                Comment

                • #9
                  JBird33
                  Senior Member
                  • Jan 2008
                  • 559

                  Do that extractor. I was having FTEs with every type of ammo I tried in my Mark III. I put in the aftermarket extractor (pretty easy) and have since put a whole brick of Federal bulk ammo through it without a single jam.

                  Comment

                  • #10
                    domokun
                    Veteran Member
                    • Apr 2008
                    • 3525

                    +1 on the extractor. It's a known issue with the Ruger .22 handguns and rifles. The first thing to get replaced is the extractor. Once you've done that, it's smooth sailing.
                    "Can our form of government, our system of justice, survive if one can be denied a freedom because he might abuse it?" --Harlon Carter
                    "A government big enough to give you everything you want is a government big enough to take from you everything you have." --Gerald Ford
                    "Government is essentially the negation of liberty." --Ludwig von Mises
                    "You cannot invade mainland United States. There would be a rifle behind each blade of grass." --Admiral Yamamoto
                    USS Hornet ARC Member.

                    sigpic
                    Join today?

                    Comment

                    • #11
                    • #12
                      XeRoFuN
                      Member
                      • Jan 2006
                      • 260

                      My Ruger MarkIII Hunter was having serious jams (fail to feed only) with Remington ammo. I ended up putting in a VQ extractor, doing the magazine mod: http://xavierthoughts.blogspot.com/2...ine-tweak.html, and polishing all parts inside the gun with a dremel (including the outside of the bolt (I noticed that it was create wear marks on the bolt, so I paid extra attention to those marks). Now the bolt moves effortlessly and cleanly, no more rubbing on the inner receiver. Finally, I polished the feed ramp (lightly...didn't want to go overboard on this...as well as the sear of course).

                      Anyway, now I still have a few fail to feed problems with the Remington ammo, but the Federal that I've tried has all fed and extracted perfectly.

                      Edit: Also added a VQ sear, and will install the trigger soon when I get my replacement one from VQ.

                      Comment

                      • #13
                        Gary13
                        Senior Member
                        • Mar 2009
                        • 1523

                        Thanks for the replys. Looks like I have some work to do. A bit uncomfortable working on this, but I will take it one step at a time.

                        Comment

                        • #14
                          ck867
                          Banned
                          • Nov 2008
                          • 1235

                          I have been having the same problem with my ruger 22/45 so I just ordered the Volquartsen Exact Edge Extractor as recommended by everyone. Hopefully this will reduce the FTE problems

                          Comment

                          • #15
                            XeRoFuN
                            Member
                            • Jan 2006
                            • 260

                            Originally posted by Gary13
                            Thanks for the replys. Looks like I have some work to do. A bit uncomfortable working on this, but I will take it one step at a time.
                            Check out this page: http://www.guntalk-online.com/2245detailstripping.htm

                            Bullseye is an expert when it comes to the Ruger .22s. Good luck!

                            Comment

                            Working...
                            UA-8071174-1