Pressure Pad for Titan Stock

[Usmc0844spare]

If anyone gives a toss, I made a spiffy platform for a "gasket in a tube" pressure pad in my Titan stock.

Could do it a lot simpler, quicker, and uglier, but I wanted pretty.

Idea is that this little platform sits about 1/16" below the barrel, and then you squish in some gasket maker to fill the gap.

Then, if you decide you don't want the pad, just remove the gasket pad from the platform and its back to fully free floated.

[joe47]

I bedded the entire barrel on a CZ with liquid gasket material and it worked great. It reduced groups by almost 3/8 inch.