Swap out Buckmark grips

[golfish]

Hey guys, I have the Buckmark Contour URX.

https://www.turners.com/browning/browning-buckmark-contour-urx--2026

The factory grips are great, but their not wood. I found these at Midway. Will these match up with my Buckmark?

https://www.midwestgunworks.com/page/mgwi/prod/B5150052

[traveler1952]

I know there are different grips depending on the model. I try a pair on mine that did not fit right.
I'd call Midway or midwest which ever you mean and ask.

[DArBad]

Hey guys, I have the Buckmark Contour URX.

https://www.turners.com/browning/browning-buckmark-contour-urx--2026

The factory grips are great, but their not wood. I found these at Midway. Will these match up with my Buckmark?

https://www.midwestgunworks.com/page/mgwi/prod/B5150052

Wont fit, OP. The UDX grips are narrower (front to back), than the URX. There's not too many aftermarket grips for both UDX and URX sized Buck Marks.

Only outfit that sells aftermarket grips for the above that I know, is Hogue's, and even their choices are limited, comparatively speaking.

[notalljuice]

I too am looking for different grips for my Lite Grey URX. Any help guys?

[golfish]

Wont fit, OP. The UDX grips are narrower (front to back), than the URX. There's not too many aftermarket grips for both UDX and URX sized Buck Marks.
.

Thanks for the info. There was a note included in the description (see below) so my URX has the finger groove frame?


"This grip set will only fit UDX, UFX or URX models with finger groove frames."

[track101]

I changed my grips and sometime later my trigger wouldn't reset. My gunsmith finally figured it out. The new grips slightly changed the small about 3-4" disconnect bar on the right side, just under the slide. Sometimes the trigger would reset and others not. He was able to fix the problem. Hope this helps in case it happens to you. Will save you lots of headaches.