Unconfigured Ad Widget

Collapse

Ruger 10/22 scope mount question.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lone shooter
    Senior Member
    • Dec 2014
    • 2486

    Ruger 10/22 scope mount question.

    So I've own my 10/22 for about 1.5 years now. Shot a fair amount of ammo thru it.

    Recently, I installed the stock Ruger picatinny rail (it's the 50yr Anni version) and mounted a scope. Took her out on Monday and shot it for the first time with the scope.

    For those unfamiliar, the rail has two holes in it and I used the provided screws to mount it to the receiver. Anyway, some time later, I notice the screws securing the rail to the receiver came loose and the whole scope, rings, and mount were now loose.

    Now, the receiver has four holes it in which are occupied by four stubby screws. Since the rail requires two holes for mounting the other two remain in place. Anyway, the two stubby screws came loose as well and were lost.

    So my question is, after shooting approx. 500 rounds with no scope, these screws stayed in place and now all of a sudden, they become loose just because of the scope? Also, if I don't replace the missing stubby screws, will I have a problem?

    My place is to just Loctite the remaining screws.
    The koolaid only works if EVERYONE drinks it - Jim Jones
  • #2
    duckman1
    CGN/CGSSA Contributor
    CGN Contributor
    • Aug 2009
    • 3823

    You should not have a problem, just be sure that the screws don't protrude enough to rob on the bolt.

    Comment

    • #3
      Citadelgrad87
      I need a LIFE!!
      • Mar 2007
      • 17001

      The stub scews are cosmetic. They serve no.purpose.

      All the rails I have seen take 4 screws, all the holes get filled.

      Be very careful. The receiver is aluminum and many have been stripped with overtightened scope rails. Positive them and tighten carefully
      Originally posted by tony270
      It's easy to be a keyboard warrior, you would melt like wax in front of me, you wouldn't be able to move your lips.
      Originally posted by repubconserv
      Print it out and frame it for all I care
      Originally posted by el chivo
      I don't need to think at all..
      Originally posted by pjsig
      You are talking to someone who already won this lame conversation, not a brick a wall. Too bad you don't realize it.
      XXXXXXXXXXXXXXXXXXXXXXX
      sigpic

      Comment

      • #4
        lone shooter
        Senior Member
        • Dec 2014
        • 2486

        Thanks guys. I'll check it out when I get home and remove that thing.
        The koolaid only works if EVERYONE drinks it - Jim Jones

        Comment

        • #5
          newbie1234
          Veteran Member
          • Feb 2016
          • 3132

          I had Ruger 10/22 I used this mount and BLUE (REMOVEABLE THREAD LOCKER) loctile . No problem at all.

          Comment

          • #6
            bluzman
            Member
            • Apr 2011
            • 462

            A word of caution. It's a good idea to remove the bolt before applying blue Loctite to the screws and screwing them into the receiver. Then don't put the bolt back in place until the Loctite has had a chance to set. Why? On the off chance some Loctite finds its way inside the receiver and onto the bolt and sets, it could glue the bolt to the receiver. I've seen a couple of reports of this happening.

            Comment

            • #7
              j15w
              Senior Member
              • Feb 2011
              • 869

              My rail used all four holes as well. When I first got it I didn't use loctite and it came loose when I was shooting. Then I used blue loctite and it's been rock solid ever since.
              It was just an old plywood boat, with a '75 Johnson, with electric choke. A young boy, two hands on the wheel, I can't replace the way it made me feel.

              Comment

              Working...
              UA-8071174-1