Buck Mark makeover

[pklin1297]

A little Buck Mark makeover to get it ready for steel challenge practice...

Base gun: Buck Mark Camper Stainless UFX

Parts from: Tactical Solutions, Allchin, Tandemkross, Burris, Volquartsen, Hogue, Browning. Before anyone asks, the Allchin compensator is pinned and cannot be removed.


Before:




After:






Will function check it soon and if all goes well, I will send it for a paint job also. Got some new ammo to try...

[gityerkneedahn]

Could you post a photo of the top of the compensator?

Hoping to pimp a Buckmark soon and I'm not keen on the TacSol compensator!


Sent from my iPhone using Tapatalk

[pklin1297]

Could you post a photo of the top of the compensator?

Hoping to pimp a Buckmark soon and I'm not keen on the TacSol compensator!


Sent from my iPhone using Tapatalk

Here you go: https://www.allchingunparts.com/coll...re-compensator

John Allchin is a good dude. He'll set you up right. Tactical Solutions sells their threaded barrels with Allchin comp already pinned. John has them in stock most of the time. The large ports makes it easier to clean out the lead and burnt-on fouling later.


S&J Customs makes one also, but compensator on a .22 is already a stretch, and I didn't want to spend $89 on one... Plus, you would either have to have Tactical Solutions install it for you, or another FFL who can order both parts and put them together. Kurt Grimes is a good source.

http://stores.sjcguns.com/sjc-5-port-aluminum-rimfire-comp/

[gityerkneedahn]

Here you go: https://www.allchingunparts.com/coll...re-compensator

John Allchin is a good dude. He'll set you up right. Tactical Solutions sells their threaded barrels with Allchin comp already pinned. John has them in stock most of the time. The large ports makes it easier to clean out the lead and burnt-on fouling later.


S&J Customs makes one also, but compensator on a .22 is already a stretch, and I didn't want to spend $89 on one... Plus, you would either have to have Tactical Solutions install it for you, or another FFL who can order both parts and put them together. Kurt Grimes is a good source.

http://stores.sjcguns.com/sjc-5-port...-rimfire-comp/

That sj one is nice!

Thanks!


Sent from my iPhone using Tapatalk

[HigsB]

So cool, i had no idea you could modify that gun. It came out great!

[pklin1297]

So cool, i had no idea you could modify that gun. It came out great!

These are easier to modify than some Ruger offerings, where the upper is the serialized part. The serial number is on the frame of the buckmark, so aftermarket parts are plenty.

[madbeans88]

Looks great, I have two of mine that I went with tademkross parts, don't really plan on changing the barrels on mine, but yours looks amazing!

[M76]

Awesome! Nice upgrades...

[pklin1297]

Thanks. Hope it shoots as well as it looks.

This is really a nice platform for .22. Great trigger and accuracy right out of the box.

[M76]

^^^just bought the basic Buckmark, now I'm looking online for upgrades!^^^

[snypr]

beautiful pshooter pklin...
keep us drooling with the pix....

[gityerkneedahn]

^^^just bought the basic Buckmark, now I'm looking online for upgrades!^^^

Keep us posted!


Sent from my iPhone using Tapatalk

[madbeans88]

curios if you upgraded the hammer as well, and is there much difference to upgrade?

[pklin1297]

curios if you upgraded the hammer as well, and is there much difference to upgrade?

Changed to Volquartsen hammer and sear spring. Reset is a bit shorter than factory, and less creep at take up.

The only upgrade I'm iffy on is the Victory trigger. I have medium sized hands and the trigger reach is just a bit too long with the flat trigger.

[madbeans88]

Changed to Volquartsen hammer and sear spring. Reset is a bit shorter than factory, and less creep at take up.

The only upgrade I'm iffy on is the Victory trigger. I have medium sized hands and the trigger reach is just a bit too long with the flat trigger.

awesome thanks!, might have to by one and try it out. also is piru the only place where steel matches are held in the socal area?? i am looking to do some matches, as soon as im comfortable with my set up.