10/22 bullpup trigger

[Paperchasin]

Hey guys... I've been itching for a bullpup 10/22 but everything I'm reading says that due to the inevitable linkage design, that the trigger is going to suck. Can anyone with experience shed some light on this?? I'm prepared to spend money on a KIDD trigger if it will make it better.

[oceanwest]

The Kidd trigger on the Hightower Armory PS90-like stock works great. All it takes is a very easy customization of getting a .25 cent delrin spacer and fitting it to the trigger linkage so there is no play.

[Paperchasin]

The Kidd trigger on the Hightower Armory PS90-like stock works great. All it takes is a very easy customization of getting a .25 cent delrin spacer and fitting it to the trigger linkage so there is no play.

I was reading about that fix... but some also advised against it due to trigger resetting issues. Where can these spacers be found?

[Thrashard340]

I have a BX trigger in an HTA kit. Even that made a noticeable difference.

[mshill]

I have two Marlin based bullpups (M60/F2000, 795/AUG). Since I built them myself I got very tight linkage. I added the MCarbo spring kits to both and the triggers are really much smoother and tolerable.