Sr22 twin tech lever. Does this look normal?

[4thmolar]

I had posted about my lever popping down. If anyone has a twin tech installed
Can they please tell me if this looks like the same space they have for the guide rod. Thanks

[avcrew]

Cant tell by the picture if the corner is chipped or not.

Make sure the ball detent is working and holding the lever up.

Make sure the recoil spring is facing the right direction. Flared end at muzzle.

Some SR22 owners install an o-ring around the spring and guide rod to act as a slide buffer. The o-ring can bind things up or break during operation. If one is installed, remove it and see if the problem persists.

If you're going to fix try to fix it yourself, it will certainly not break the bank to do a process of elimination fix. Buy a new TTT takedown lever for $16, buy a new OEM recoil spring and guide rod from Ruger. The solid stainless guide rod, in my opinion is unnecessary.