Help with new Buckmark needed

[srvgtrfan]

so I bought a new Buckmark UDX and after I removed the copper gunk/anti-seize, or whatever that is, I find this odd screw that is locking the barrel. Looks like a hex that has cracked or maybe this is a new type of security screw? Called Browning and they say this is correct and that they have a special tool to remove this screw and highly recommend that I do not attempt to remove it. Anyone seeing screws like this locking down their Buckmark barrels? If so, have you been able to remove it?

[Itwentbang]

so I bought a new Buckmark UDX and after I removed the copper gunk/anti-seize, or whatever that is, I find this odd screw that is locking the barrel. Looks like a hex that has cracked or maybe this is a new type of security screw? Called Browning and they say this is correct and that they have a special tool to remove this screw and highly recommend that I do not attempt to remove it. Anyone seeing screws like this locking down their Buckmark barrels? If so, have you been able to remove it?

Well yeah, as a matter of fact. I just picked up my new Practical Monday and that orangish anti-seize is all over the bolt hole. It certainly does't look like a normal allen screw to me, either.
Thought it was just me...

[srvgtrfan]

Thanks for the quick response. So yours has the same allen screw with a slot? I was thinking it could be that the staked it or maybe there is a locking ring on top of the allen. Really not liking the idea of not being able to remove the barrel...

[psango]

http://www.amazon.com/Titan-Master-Security-Steel-Material/dp/B01DCDGYU6/ref=sr_1_11?ie=UTF8&qid=1459312287&sr=8-11&keywords=security+screwdriver+set

Probably in this set

[ojisan]

Torx bit and some heat needed:

http://www.rimfirecentral.com/forums/showthread.php?t=599420

[Itwentbang]

Really not liking the idea of not being able to remove the barrel...

I'm not ready to start screwing around with a brand new pistol, but interchangeable barrels were a selling point, for me.
That said, this pistol is crazy accurate and fun to shoot, so perhaps it won't matter.

I hope you're as pleased, otherwise, with your Buck Mark as I am.

[Itwentbang]

Torx bit and some heat needed:

http://www.rimfirecentral.com/forums...d.php?t=599420

Thanks for this.
I'm not that motivated to remove it, now

[srvgtrfan]

So if you aren't removing the barrel, I presume you are using a bore snake to clean it? A rod won't work unless you are going at it from the front. I think the new manual recommends a bore snake.

['ol shooter]

I have had a Buck Mark since new in 1985, only time I pulled the barrel was to replace it with a Tac-Sol unit. I just bore snake mine when it needs it, which is infrequently, I use a bent bronze brush to keep the chamber clean. I use One Shot dry spray lube to clean and lube, and TW-25 grease on the slide rails. I haven't had the slide off in several years, since the gun does not gunk up with no oil in the action. I do not have to disturb the optics to clean the gun.

[Itwentbang]

So if you aren't removing the barrel, I presume you are using a bore snake to clean it? A rod won't work unless you are going at it from the front. I think the new manual recommends a bore snake.

It's not clear whom you are asking, but I'll answer because you posted immediately below me:
No, I don't care for snakes, I'm cleaning it with the Otis set up. I feel, but can't prove, that snakes hold abrasives.

[srvgtrfan]

Thank you both for responding with regard to the cleaning. I appreciate the feedback. Will look into the Otis kit.

[Musubi1000]

Have you read your manual or watched a YouTube video on how to properly clean your Buckmark? You really shouldn't clean from the muzzle. All the accuracy of a barrel is at the end of it. You can possible damage the crown and or put unnecessary wear on it from a rod. The screw you speak of is how you disassemble it. Just get the proper Allen wrenches and watch a YouTube vid.

[srvgtrfan]

Have you read your manual or watched a YouTube video on how to properly clean your Buckmark? You really shouldn't clean from the muzzle. All the accuracy of a barrel is at the end of it. You can possible damage the crown and or put unnecessary wear on it from a rod. The screw you speak of is how you disassemble it. Just get the proper Allen wrenches and watch a YouTube vid.

Did you see the photos I posted? Looks like no allen screw I've seen before. Looks like either they staked it or have some type of security screw in there. Watched plenty of vids (exhausted from it actually), and no I don't clean from the muzzle end. Keep in mind that i have another Buckmark and that screw is nothing like the new 2016 model. My other UDX barrel comes off quite easily. I would love to see a video that shows that type screw being loosened. As for the manual, yes i read it.

[Itwentbang]

Thank you both for responding with regard to the cleaning. I appreciate the feedback. Will look into the Otis kit.

You're welcome!

Not to shill for the Otis, and in fact if someone has a better idea I'm happy to hear it, but for me the advantage was the aircraft-type cables that serve as rods; easy to clean and less likely to carry imbedded residue.

I hope you're as happy with your Buck Mark as I am.

[Itwentbang]

Have you read your manual or watched a YouTube video on how to properly clean your Buckmark? You really shouldn't clean from the muzzle. All the accuracy of a barrel is at the end of it. You can possible damage the crown and or put unnecessary wear on it from a rod. The screw you speak of is how you disassemble it. Just get the proper Allen wrenches and watch a YouTube vid.

Why on earth would one remove a barrel to clean a Buck Mark? The breech is easily accessible by simply removing the slide.
Have you read the manual?