Just recently bought my first 1022 and every time I rack the bolt back I get this sound... It sounds like the bolt and rubbing against the spring. I tried taking it out and putting it back in, but still makes that sound. Normal?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
10/22 Grinding issue?
Collapse
X
-
10/22 Grinding issue?
Just recently bought my first 1022 and every time I rack the bolt back I get this sound... It sounds like the bolt and rubbing against the spring. I tried taking it out and putting it back in, but still makes that sound. Normal?

"The right of the people to keep and bear arms shall not be infringed. A well regulated militia, composed of the body of the people, trained to arms, is the best and most natural defense of a free country."
- Dianne FeinsteinTags: None -
Mine doesn't sound like that.
First, as Spyder said, shoot it. If it cycles, I'd lube it and forget it. Lube the sides of the receiver and the spring/rod.
Is it new? Check the rod the spring rides on. It's painted and might need polishing. Several aftermarkets, like Kidd, make a spring and rod txt is already polished.
But I'd shoot it first.Originally posted by tony270It's easy to be a keyboard warrior, you would melt like wax in front of me, you wouldn't be able to move your lips.Originally posted by repubconservPrint it out and frame it for all I careOriginally posted by el chivoI don't need to think at all..XXXXXXXXXXXXXXXXXXXXXXXOriginally posted by pjsigYou are talking to someone who already won this lame conversation, not a brick a wall. Too bad you don't realize it.
sigpicComment
-
Will do.Mine doesn't sound like that.
First, as Spyder said, shoot it. If it cycles, I'd lube it and forget it. Lube the sides of the receiver and the spring/rod.
Is it new? Check the rod the spring rides on. It's painted and might need polishing. Several aftermarkets, like Kidd, make a spring and rod txt is already polished.
But I'd shoot it first.
thanks for the replies guys.

"The right of the people to keep and bear arms shall not be infringed. A well regulated militia, composed of the body of the people, trained to arms, is the best and most natural defense of a free country."
- Dianne FeinsteinComment
-
I have seen a couple of recoil spring guide rods that were so rough they almost looked threaded.
They sound like this one and have a tendency to make the charging handle drag and catch which can lead to balky bolt movement with resulting feed and eject jams.
The rod surface should look bright and smooth.
If it's dark and rough you can slick it up.
Remove recoil spring assembly from gun.
Put on table with pointed end down.
Push charging handle down so the recoil spring is collapsed all the way.
Hold handle and spring back by gently grabbing the rod with pointed nose small vice grips.
Polish the exposed rod with crocus cloth until smooth.
Clean and lube.
Originally posted by Citadelgrad87I don't really care, I just like to argue.Comment
-
Fixed it.

This roll pin was not all the way in.

"The right of the people to keep and bear arms shall not be infringed. A well regulated militia, composed of the body of the people, trained to arms, is the best and most natural defense of a free country."
- Dianne FeinsteinComment
-
I put Kidd guide rods in mine. It's amazing how much smoother the bolt is.Comment
-
"He is your friend, your partner, your defender, your dog.
You are his life, his love, his leader. He will be yours, faithful and true, to the last beat of his heart.
You owe it to him to be worthy of such devotion."
Originally Posted by JackRydden224
I hope Ruger pays the extortion fees for the SR1911. I mean the gun is just as good if not better than a Les Baer.Originally posted by redcliffA Colt collector shooting Rugers is like Hugh Grant cheating on Elizabeth Hurley with a hooker.
Comment
-
Comment
-
I am not suggesting that you do this or need to do it. But, I mine I polished the inside of the receiver with rubbing compound and dremel buffing wheel. Also polished the bolt to a mirror finish. I also run dry lube on the surfaces.
Polished the spring guide rod also. Those are really rough cut to say the least.
If you want to go all out, KIDD sells an aftermarket guide rod and spring set.Comment
-
-
Mine did the same thing. I put a kidd kit in it, no kidding, you can hardly tell when the thing fires.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,936
Posts: 25,177,638
Members: 358,862
Active Members: 5,392
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 39753 users online. 58 members and 39695 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment