Unconfigured Ad Widget

Collapse

Walther HK MP5 SD .22 range report

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mcm95403
    Member
    • Mar 2008
    • 279

    Walther HK MP5 SD .22 range report

    I got my (very slightly used) MP5 SD .22 out of jail this morning and went right over to Chabot to celebrate.

    First, I have to say it's really nice handling a .22 that feels like a REAL GUN, not a wimpy/fragile toy. After I jailed it, I bought a fixed stock, spare mag and a mag clamp from CheaperThanDirt.com. The fixed stock is MUCH more comfortable, the extra mag was great to have, but the magazine clamp doesn't work on the .22 mags. The 9mm mags would probably be fine, but the .22 mags have slots in the sides. When you try to use the clamp, it needs so much force to hold the mags that the slots compress and the follower can't slide right. Oh well.

    Turns out I didn't have the 2.5mm hex wrench needed to adjust the rear sight, so I went ahead and attached the cheap 4x compact scope I had. Spent some time getting that set up and then fired away at 50 yards. I used some Stingers, some CCI Tactical, and some Winchester 36 grain 1280 fps "white box" (box of 333 rounds). Surprisingly, the Winchester got the best groups. I may go back tomorrow and try some more since the scope mount didn't fit quite right, so I'd fix that first.

    The rifle got a lot of attention since they are still new enough to not have been seen much yet. I think the coolest part though was not needing a bullet button since it's .22. SO NICE to just snap out the mag and snap the next one in!

    In short, yes, I'm VERY pleased with this, the ergonomics are great (and the fixed stock adds about 1.5" to the LOP as well), the front grip is very comfortable and although it looks like it would be nose heavy, it didn't feel that way to me at all.

    Only problem is now I want the Walther G36 .22 even more.......
    Last edited by mcm95403; 10-23-2017, 9:31 PM.
    Thanks,
    Marc
    www.dunritenetworks.com
  • #2
    SkyHawk
    I need a LIFE!!
    • Sep 2012
    • 23525

    Wow 10 days goes by fast . That is exactly the one I want, very nice !!!
    Click here for my iTrader Feedback thread: https://www.calguns.net/forum/market...r-feedback-100

    Comment

    • #3
      marcopolo_9mm
      Member
      • Feb 2013
      • 169

      The fixed stock looks great on the SD model - nice! I posted my impressions on the regular model over a year ago





      Overall I'm _very_ happy with it. It's been as reliable as my Glock and not picky with ammo at all (all ammo I've used is HV).

      Comment

      • #4
        mcm95403
        Member
        • Mar 2008
        • 279

        I'm going to have the HK on the side ceracoated in red and the MP5 done in white.
        Thanks,
        Marc
        www.dunritenetworks.com

        Comment

        • #5
          Dead*Reckoned
          Veteran Member
          • May 2010
          • 2643

          Thanks for the review! Looks like a blast! Probably sounds like suppressed 9mm when you are shooting it too!

          Comment

          • #6
            GiddyHitch
            Member
            • Mar 2014
            • 274

            Nice. Those SD variants aren't nearly as common as the A3 variants around here. I've got 2k+ rounds through mine without any issues other than having to buy the pricey HKPro mount after trying a couple of junky airsoft mounts for my RDS.

            Comment

            • #7
              mcm95403
              Member
              • Mar 2008
              • 279

              Yep, it's pretty quiet - especially compared to my PTR :P

              I ordered a UTG claw mount for it - $60 on E-Bay. I'll post a pic when it's on.
              Thanks,
              Marc
              www.dunritenetworks.com

              Comment

              • #8
                mcm95403
                Member
                • Mar 2008
                • 279

                Well, on the UTG claw mount the pin on the shaft sheared off when I tried to clamp it in place. Waiting for a call back from UTG customer service.
                Thanks,
                Marc
                www.dunritenetworks.com

                Comment

                • #9
                  mcm95403
                  Member
                  • Mar 2008
                  • 279

                  CRAPPY response from UTG. They're sending me a replacement roll pin, and say that the Walther MP5 is NOT an MP5, so their mount won't fit - even though it's stamped HK MP5 right in the side of the receiver.
                  Thanks,
                  Marc
                  www.dunritenetworks.com

                  Comment

                  • #10
                    mcm95403
                    Member
                    • Mar 2008
                    • 279

                    Went to the indoor range in Milpitas this afternoon. Didn't care much for the facility, but all these shots were at 25 yards with open sights and my crappy eyesight. This is also a mix of Winchester white box, Stinger and AR Tactical ammo. I've put almost 500 rounds through it now and it just runs perfectly!

                    The bigger groups were done firing pretty quickly - maybe 1 a second or so. The tighter groups were 2-3 second aim time per shot.
                    Last edited by mcm95403; 10-23-2017, 9:31 PM.
                    Thanks,
                    Marc
                    www.dunritenetworks.com

                    Comment

                    Working...
                    UA-8071174-1