Unconfigured Ad Widget

Collapse

Crickett Feeding Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rottentofu
    Senior Member
    • Jan 2015
    • 2192

    Crickett Feeding Problem

    I just purchased a new .22 Crickett for my son. I test fired it with a few rounds of .22lr and encountered no problem. I then test fired a few Super Colibri (the powderless ones) and encountered no problem.

    The next day, I tried to feed the rifle with a .22lr and I couldn't get the round to insert completely into the barrel. Please see pics.

    I cleaned the barrel to make sure there is nothing in there that could obstruct the round. That did not resolve the problem.

    Why would the rifle worked one day with one ammo type and failed the next day? I shot less than 100 rounds through this rifle. The Super Colibri still works for this rifle.

    Thank you for your help!
    Attached Files
  • #2
    ColdDeadHands1
    Veteran Member
    • Nov 2008
    • 3391

    I have the same problem. It is just a bit$% to load a round into that chamber! I'm using CCI Mini Mags too. Seems like the chamber needs to be honed out but I certainly don't have the right tool for that.


    "Let me guess... This isn't about the alcohol or tobacco?"

    Comment

    • #3
      Masterdebater
      Senior Member
      • Aug 2009
      • 1095

      Barrel gnomes.

      Can you be more specific? You shot which brand followed by the powderless, then had issues with what brand the next day? Was it only one round from that box or multiple?

      Comment

      • #4
        Masterdebater
        Senior Member
        • Aug 2009
        • 1095

        Originally posted by ColdDeadHands1
        I have the same problem. It is just a bit$% to load a round into that chamber! I'm using CCI Mini Mags too. Seems like the chamber needs to be honed out but I certainly don't have the right tool for that.
        Hmmm... not necessairly "hone" but maybe a good polishing. Grab a 22lr barrel mop attached to brass rod, dap of mothers polish on mop and spin by hand a bit. You could use a drill with the rod chucked in it to speed it up, just dont over do it.

        Comment

        • #5
          SB1964
          Veteran Member
          • Mar 2012
          • 4876

          Sounds like minor lead/fouling deposits may be stopping the longer .22lr from entering the chamber. You fired the much shorter colibri & it dirtied the chamber or edge of barrel/chamber.

          Start over by cleaning the chamber with a brush & see what happens. Run a wet patch first followed up by the brush. After cleaning is complete, try the full length .22lr first & check your answer.
          Yes I took the pic, no I didn't go swimming!

          Comment

          • #6
            RandyD
            Calguns Addict
            • Jan 2009
            • 6673

            If your rifle chambered a .22 LR with no difficulty, and then after firing shorter rounds with a lead bullets, the rifle develops difficulty in chambering a .22 LR, I would strongly suspect that lead deposits in the chamber and throat areas are the cause.

            I recommend cleaning and then inspecting the chamber. I recently had similar problems with my .22 Colt Ace conversion kit. It would not fully chamber a .22 LR round. I had to resort to using a dental pick, and I was amazed that at the amount of lead that I was able to scrape out.
            sigpic

            Comment

            • #7
              'ol shooter
              Veteran Member
              • Mar 2011
              • 4646

              Clean the chamber with a bore brush and solvent.
              sigpic
              Bob B.
              (\__/)
              (='.'=)
              (")_(")

              Comment

              • #8
                TAS
                Probationary Member
                CGN Contributor - Lifetime
                • Jun 2009
                • 1280

                Originally posted by SB1964
                Sounds like minor lead/fouling deposits may be stopping the longer .22lr from entering the chamber. You fired the much shorter colibri & it dirtied the chamber or edge of barrel/chamber.

                Start over by cleaning the chamber with a brush & see what happens. Run a wet patch first followed up by the brush. After cleaning is complete, try the full length .22lr first & check your answer.
                ^^^ This. Might just need a little extra cleaning after the Colibris. Not sure but your picture of the Colibri makes me wonder if they're moly coated, which is adding the extra funk to your chamber.

                BTW - nice rifle.
                NRA Life Member

                Comment

                • #9
                  Rottentofu
                  Senior Member
                  • Jan 2015
                  • 2192

                  I sprayed the barrel with gun scrubber and ran a bore snake through it with cleaning lube multiple times. As far as I can see the barrel is clean. I still can't feed a .22lr into the barrel.

                  If there is enough deposits to obstruct feeding a .22lr ammo into the barrel, I SHOULD be able to see it with an naked eye right?

                  Thank you all so far for the help!

                  Comment

                  • #10
                    sealocan
                    Calguns Addict
                    • Mar 2012
                    • 9958

                    this is a longshot but if you're sure it's not a lead deposit...and you're probably already checked for this but...

                    sometimes case separation happens and a little bit of the shell casing ( sometimes it's the front half, so it looks like a ring, but can also be just a little bit of brass.) can be stuck inside the chamber.

                    so you might see a ring of brass, that may not even be a brass colored at this point, at the front part of your chamber that all the scrubbing and cleaning and the world will not remove it.

                    I would also go buy or borrow some different rounds and try different makers of different ammo to see what results you get.

                    good luck and that is a good looking rifle...
                    those Crickets have come a long way with the stainless steel and colored laminated stocks now.

                    Comment

                    • #11
                      sealocan
                      Calguns Addict
                      • Mar 2012
                      • 9958

                      if you can't get your hands on some different types of ammo...
                      you could try sliding in some spent cases to see if all of the spent cases can fit (some may be a little deformed from being fired, but you get what I'm saying.) that would tell you the issue is not at the rear of the chamber.

                      and to focus on the front.

                      Comment

                      • #12
                        sealocan
                        Calguns Addict
                        • Mar 2012
                        • 9958

                        Wait ! by George I think I've got it!

                        after you originally cleaned your gun...
                        your wife accidentally put it in the clothes dryer ...

                        and now she shrunk it.

                        ;-)

                        maybe she's done this before to you... let me guess...

                        it was originally a Remington 70 chambered in 30-06 ?

                        Comment

                        • #13
                          RandyD
                          Calguns Addict
                          • Jan 2009
                          • 6673

                          Originally posted by Rottentofu
                          I sprayed the barrel with gun scrubber and ran a bore snake through it with cleaning lube multiple times. As far as I can see the barrel is clean. I still can't feed a .22lr into the barrel.

                          If there is enough deposits to obstruct feeding a .22lr ammo into the barrel, I SHOULD be able to see it with an naked eye right?

                          Thank you all so far for the help!
                          You will not necessarily see lead in the chamber or barrel. It has the ability to shine and deflect light just like steel. Try a new brush but don't use any solvent, and short stroke the brush in the chamber area. Solvent tends to have some lubricating properties, and can cause the brush to slip over the lead instead of dislodging it.

                          I have cleaned my Anschutz competition rifle with a bore brush and solvent, and then used a bore scope to inspect the barrel, and I could see lead deposits still in the barrel. Using a new brush with no solvent dislodged that lead.
                          sigpic

                          Comment

                          • #14
                            Rottentofu
                            Senior Member
                            • Jan 2015
                            • 2192

                            Got it. I will give it another go. Thanks again for the help everyone. Will report back with results!

                            Comment

                            • #15
                              jtv3062
                              Veteran Member
                              • Oct 2005
                              • 2778

                              Did you fire shorts in the rifle if so clean the chamber.
                              Do not fear the enemy, for your enemy can only take your life. It is far better that you fear the media, for they will steal your Honour
                              Let's pray for Obama Psalm 109:8






                              159

                              Comment

                              Working...
                              UA-8071174-1