vtr 700 and leupold mark4

[rolly]

What best scope mounts (rings and rail? ) do I need for my:
Remington VTR 700 + Leupold Mark4 M1 4.5-14X50, 30 mm ?

Thanks

[Jicko]

Badger 20MOA + Badger rings

Get them directly from badger's website or you can try triadtactical

[rolly]

Badger 20MOA + Badger rings

Get them directly from badger's website or you can try triadtactical

yes they look good !

What would you think of Warne?

[maxicon]

Warne makes good stuff, but Badger's sturdier and higher end (and heavier, too, I'd imagine). Warne's pretty mid-range. I've got several sets, and I like them fine, but they're all used on .223 and below.

[rolly]

i use 308

so badger the best brand? and nobody comes close to it?

[Fjold]

Ken Farrel makes some great stuff, I have his mounts and rings on my 375 H&H.

JMHO
Unless you are going to shoot it at 1,000 yards you don't really need a 20 MOA mount.

[FMJBT]

+1 for Ken Farrell mounts. I have them on all my bolt actions and have never had a problem with them. For the anal retentive, they even have bedding channels milled into the base for epoxy bedding to your receiver....

TPS also makes some really nice bases and rings that are a bit more affordable than the badger Ordnance parts: http://www.tpsproducts.com/

[fairfaxjim]

I've got 30mm detachable Warne rings and mounts on my .308 for approx 1000 rounds with no problems at all. I also use them on my AR's. Good value for the price if you don't need the real beefy rings.

[rksimple]

Farrels are good, but their bases sit very high. It was too high for me, even with low rings.

Along with Badger, Seekins Precision stuff is top tier. Its a better bargain as well.

[rolly]

how do i figure out the size of the rings?

[IGOTDIRT4U]

Badger 20MOA + Badger rings

Get them directly from badger's website or you can try triadtactical

Ditto that. Make sure you get the right tube size!

[IGOTDIRT4U]

how do i figure out the size of the rings?

They are 30mm. And if you meant height, get the standard height rings. It will just clear.

[homerm14]

Talley makes excellent rings and base's as well.

[rolly]

They are 30mm. And if you meant height, get the standard height rings. It will just clear.

yes i meant hight.
I would like to be sure that it will clear. How would I figure it out ?

from badger:
standard is .823mm
medium is .885mm
(USMC) rings are .886 and higher...

[rolly]

what do you guys think about:
Burris XTR Medium 30mm Rings ?

Xtreme Tactical 30mm Rings
The massive strength of a wide 6-screw ring is combined with lightweight yet thick cross section aluminum to provide a reliable return-to-zero ultra strong mounting system for Picatinny-style rails. These 1/2" Xtreme Tactical Rings are ready for the heaviest of scopes, massive recoil, and severe usage.

http://www.shootforless.com/index.php?main_page=product_info&cPath=15&products_id=41