I'm somewhat new to scopes, was shooting iron sights before that... I have two scopes: one is Nikon I bought new, the other is a used Japanese scope of some kind... With both of them, after I dial in my scope using a laser bore sight, that alignment holds for only maybe one or two perfect on-bullseye shots after which the vibration of the gun has knocked the sight alignment way way off. Also, if I align either scope using the laser sight and then look through the scope with the rifle rested and tap the scope with my fingers, I can actually watch the sight alignment slipping off. What am I not understanding or doing wrong? Is it possible that two different scopes would have the same defect? Or is this a problem common to all cheaper scopes? Or is this true of all scopes and everyone basically has to re-sight-in the alignment every other shot? Is there any brand of scope that never ever does this?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Scope problem I keep having
Collapse
X
-
That would be the definition of a bad scope. Many cheap scopes can break quickly and cause this problem. My nikon M223 has not had any issues but you may have a bad one, then again it's not really a "cheap" scope.
However before we decide the scopes are bad, how are they being mounted? It's possible you have a bad scope mount. -
No, I've had several scopes that have been sighted in once and have stayed zeroed since the first adjustment.Or is this true of all scopes and everyone basically has to re-sight-in the alignment every other shot?
Could be the scope, the mount, what rifle you've mounted on, or a combination of all three. I had this problem scoping my 59/66 SKS, my first experience with a scope. My problems ended up being:
1. The scope was mounted on the receiver cover, which has a tight spring in it banging the bolt back and forth. Not a stable platform to mount a scope on in the first place.
2. The scope mount bolts continually worked their way loose, even with lock-tight. It was a crappy mount, mounted on an unstable platform.
3. I had a $20 Leapers scope. A crappy scope can have reticles and lenses that move around even when it's brand new. Even good scopes can have parts come loose inside, so if you picked up your Nikon used, there's no guarantee that it's still good.
Assuming that you aren't trying to mount the scope on an unstable platform (like my SKS receiver), I'd start with looking at the mounts. They need to not move at all, but the screws can't be too tight that you damage the scope. Get yourself a torque screw driver and tighten them to Leupold's specifications depending on whether your rings are aluminum or steel. Off the top of my head I think I torqued the bases on my last project to 18 in/lbs and the rings to 15 in/lbs, but I'm not positive. I also use some of the Lock Tight that isn't permanent. Look up scope mounting on YouTube and watch some videos too. There are a lot of variables involved that you may have not considered.
If you are trying to mount it on an unstable platform, either go back to irons or look into scout mounts.Last edited by Vacaville; 03-25-2013, 3:18 PM.Comment
-
Definitely very important to have a good set of rings and a good base. Also the scopes may just be paperweights at this point if they are not of quality or have seen better days.Comment
-
Might be the way your mounting them rather than the scope or the mount. Make sure to push forward on the optic with it loose before tightening. Keep it pushed forward while tightening."Men sleep peacefully in their beds at night because rough men stand ready to do violence on their behalf."
George Orwell
http://www.AnySoldier.comComment
-
Newbie: IF you posted where your location is then someone could offer to take a look at it and help. If you are near me I would be glad to help. I even have a good known spare scope to test with.
Posting your location seems to be a real problem with the newbie crowd lately.A 30cal will reach out and touch them. A 50cal will kick their butt.
NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society memberComment
-
its not the mount; the mount's rock solid. i think they're just both broken since this clearly is not a common problem. the one i bought new was the display one maybe someone in the store dropped it. the other scope i bought used maybe that person sold it cause it was broken. ****Comment
-
Some lower priced scopes can't handle the recoil of certain calibers. What kind of rifle is it in what caliber and what is the model of the nikon? Are there any markings on the japanese scope that would ID it? Could it be an airsoft scope?Comment
-
After making any adjustments to the turrets, it's always a good idea to 'tap' them or overturn them 1-click and turn them back. They are under spring tension and sometimes the adjustments need to be settled before they start tracking properly."We got the m*thaf*ckin' champion blood!" - Hunter PenceComment
-
Remount be sure to check your mount and that nothing is stripped.
Use blue lock tight. Look up "Box test"
If both scopes are doing it
- might have stripped ring
- mount on rifle is loose
- check stock and barrel
Good luck
DimitriComment
-
Give more details on the exact scopes and exact mounting system as well as the rifle.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,939
Posts: 25,177,707
Members: 358,862
Active Members: 5,392
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 36837 users online. 116 members and 36721 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment