Unconfigured Ad Widget

Collapse

Mounting vortex strikefire

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ucsdryder
    Member
    • Jun 2009
    • 344

    Mounting vortex strikefire

    I put my strike fire on my piccanty rail and no matter how much I finger tighten it it will still move forward and back. Side to side is tight. Do you guys use a wrench/socket to tighten it down or are you able to hand tighten and keep it from wiggling?

    I am using the included high mount on a flat top AR.
  • #2
    xoutxkastx
    Senior Member
    • Feb 2012
    • 632

    That's weird it really shouldn't do that. I believe the Strike fire has a 30mm body. The next size ring is 34mm. Could the threads on the rings stripped? Are you able to exchange it for another strikefire? I've had 2 of those before and never an issue. GL on the fix.

    Comment

    • #3
      ucsdryder
      Member
      • Jun 2009
      • 344

      The ring is fine. It is very solid. The mount is the issue. The slot on the piccatiny rail is wider than the bar on the mount. So when I attach the mount to the rail it has a little bit of wiggle forward and back.

      I am thinking I could use a socket to tighten it.

      Comment

      • #4
        xoutxkastx
        Senior Member
        • Feb 2012
        • 632

        Oh my bad. I read it wrong. I can hand tight mine had no play. It should't hurt to use the socket wrench. I believe torque settings should be 35-40lbs

        Comment

        • #5
          DudeDoug2000
          Member
          • Jun 2010
          • 232

          I had a similar issue with my sparc the entire high mount would move forward and back I eventually got it tight I was affraid to over tighten it I guess, eventually I cranked it hard and got it to tighten up more, I think the loc tight was preventing it, of course I could have been wrong and ruined something wouldn't be the first time. I just went ahead and did it and it's good now.
          "It's time to die"
          Chuck Norris In Invasion U.S.A.

          Comment

          • #6
            Gringo Bandito
            Senior Member
            • Apr 2006
            • 1835

            I recently installed one on a flat top ar and used a wrench tighten it down and it is solid.

            Comment

            • #7
              Mr. Meeseeks
              Veteran Member
              • Jan 2008
              • 2951

              You can try shimming the rail with aluminum foil. Or if the mount is defective, call or email Vortex, they will take care of you, they're known for having one of the best warranties in the industry.

              Or if you're like me, I'd make it an excuse to buy a nicer mount

              Comment

              • #8
                02Caltaco
                Member
                • Apr 2012
                • 488

                I test fitted mine last night on my 522 and just getting it finger tight it was solid. I did notice that the clamp piece on the screw head side can spin 180 and not sit square. I'm not sure if that would make it harder to get tight.

                I was actually wondering if it's suposed to be rotated depending what it's mounting to.

                Comment

                • #9
                  Dinosaur Jr
                  Senior Member
                  • May 2012
                  • 1707

                  Originally posted by Ragweed
                  I recently installed one on a flat top ar and used a wrench tighten it down and it is solid.
                  I do the same thing. Tight, but not too tight. I also use BLUE thread locker on any other fasteners not directly involved with the rail mount.
                  Laws against murder and attempted murder should have been the only gun control laws ever needed in America...

                  Comment

                  • #10
                    OpticsPlanet
                    Vendor/Retailer
                    • Apr 2009
                    • 2129

                    No issues with my SPARC. "Finger -tight" and "Tight, but not too tight" are hard to duplicate if you remove and replace an optic. An inch-pound torque driver is an excellent investment for around $50. It's money well spent.

                    Mark H.
                    CalGunners: Take 5% off your order of $50 or more at OpticsPlanet by using coupon code CALGUNS! Some exclusions apply.

                    OpticsPlanet
                    http://www.opticsplanet.com
                    Toll-Free (888) 504-7864
                    Send us a private message if we can be of help!

                    Comment

                    • #11
                      wamphyri13
                      CGN Contributor
                      • Apr 2008
                      • 2759

                      I purchased two Sightmark scopes from Optics Planet around Christmas last year (one for my friend and one for myself) similar to the Vortex and experienced the same issue. But only momentarily. After first installing the base to the rail, I experienced wiggle. Removed the scope and tried again. No wiggle. If you haven't already made sure it was dead on flush when mounting, try it again. Mine worked fine the second time.
                      Ryan
                      The following statement is true.
                      The preceding statement was false.

                      Comment

                      • #12
                        onegtalon
                        Senior Member
                        • Aug 2011
                        • 2391

                        Pending on what type of rail you have YMMV. I know the Ruger rails that comes with my 10/22 and my 22/45 are not 'cut deep enough' so that some rings/mounts do not fit correctly.

                        I ended up changing my ruger rails to 'standard' rails.... there's some threads about this on here and rimfire central.

                        (I got a Ruger 22/45 with a Burris Fastfire III w/ the Burris mount.... it didn't fit so I got a Volquartsen rail and it was all good)
                        Laws and common sense is all up to interpretation to us humans... and guess what? Humans suck.

                        Onegtalon... toooooo many hobbies man !...

                        HDF, CGN/CGF member
                        sigpic

                        Comment

                        Working...
                        UA-8071174-1