Unconfigured Ad Widget

Collapse

Mounting an EoTech

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SDBlaster
    Senior Member
    • Mar 2011
    • 580

    Mounting an EoTech

    I just bought an eotech 512 and was wondering the best place to mount it. I have a 14inch dd quad rail so i can mount it anywhere and was curious if there is a correct amount of "eye relief" (is that the appropriate term?); or if it is all about personal preference. It is primarily a range rifle (.223) and I have a 3x mag but it probably wont be used much or at all. Thank you for your help
  • #2
    Merc1138
    I need a LIFE!!
    • Feb 2009
    • 19742

    There is only a "correct" way to do it if you're using a magnifier. Some people prefer it further out, some people like it up close, some want it in the middle for weight distribution, etc. Completely personal preference. Non magnified red dots don't have "eye relief".

    Now since you mentioned a magnifier, those do have eye relief and it's usually fairly short. Plus you'll likely have to keep the eotech close to the magnifier to get a decent picture, so that can dictate where it goes.

    Comment

    • #3
      stix213
      AKA: Joe Censored
      CGN Contributor - Lifetime
      • Apr 2009
      • 19002

      When I installed my magnifier it didn't seem there was much of a choice about location. I had to install it forward of the rear BUIS and close enough back for proper eye relief. Wasn't much choice. Then you'll probably want to mount the actual eotech sight directly in front of it, otherwise you may see the metal and plastic of the sight if too far forward of the magnifier when looking through it. Just play around with it until you get it where you like it, but the magnifier is kinda going to dictate where it all goes.

      My Eotech 557 + 3x magnifier setup is the 2nd one down in this pic of course (not a 512, but close enough)

      Last edited by stix213; 02-15-2012, 5:48 PM.

      Comment

      • #4
        tomd1584
        Calguns Addict
        • Sep 2008
        • 5895

        I would avoid two things:

        1. Mounting on you FF hand guard (even if it's a daniel defense)
        2. Bridging the upper receiver/hand guard. Flex in the hand guard will affect your POI.

        Other than those two things, play around with what feels more comfortable to you.

        Comment

        • #5
          SDBlaster
          Senior Member
          • Mar 2011
          • 580

          Thanks guys, good info as always...

          Comment

          • #6
            OpticsPlanet
            Vendor/Retailer
            • Apr 2009
            • 2129

            You'll notice something interesting - if you mount it further forward, the reticle appears to be larger in the window - but it's the same size. The optic housing
            CalGunners: Take 5% off your order of $50 or more at OpticsPlanet by using coupon code CALGUNS! Some exclusions apply.

            OpticsPlanet
            http://www.opticsplanet.com
            Toll-Free (888) 504-7864
            Send us a private message if we can be of help!

            Comment

            • #7
              negolien
              Veteran Member
              • Sep 2010
              • 4829

              nice

              Originally posted by OpticsPlanet
              You'll notice something interesting - if you mount it further forward, the reticle appears to be larger in the window - but it's the same size. The optic housing
              Awsome info.. typical awesome sauce from an OpticsPlanet source
              "Men sleep peacefully in their beds at night because rough men stand ready to do violence on their behalf."

              George Orwell

              http://www.AnySoldier.com

              Comment

              Working...
              UA-8071174-1