Unconfigured Ad Widget

Collapse

Saiga 7.62 rifle & Bipod - question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dphouse
    Member
    • Jan 2011
    • 131

    Saiga 7.62 rifle & Bipod - question

    Hey guys,

    I'm having some difficulty locating a bipod that will mount to my Saiga 7.62 rifle. I've tried the UTG clamp on bipod, but it wasn't sturdy enough. I bought a UTG swivel stud mount bipod, but that didn't fit/work with the swivel stud on my rifle.

    Can anyone recommend a bipod that will mount to my rifle?

    Thanks,
    ns
  • #2
    GeoffLinder
    Senior Member
    • Jul 2009
    • 2425

    Does the QD sling stud you have look like the type in the link below?



    If so, then any Harris bipod will do the trick for ya'. Harris is quality stuff.

    Welcome to HarrisBipods.com All bipods are manufactured by Harris Engineering NEW  MERCHANDISE - BUY NOW Welcome to

    Comment

    • #3
      dphouse
      Member
      • Jan 2011
      • 131

      Yes, the stud looks more or less like the one pictured. However, it's the diameter of the existing stud on my Saiga that was the problem with the UTG bipod adapter.

      Do you know if the Harris bipod will fit/work for sure?

      Comment

      • #4
        GeoffLinder
        Senior Member
        • Jul 2009
        • 2425

        What is the diameter of the stud you have? If it's anywhere from 3/8 to 7/16 you are fine.

        Comment

        • #5
          dphouse
          Member
          • Jan 2011
          • 131

          diameter is a little more than 1/4 of an inch, almost 5/8's.

          Comment

          • #6
            GeoffLinder
            Senior Member
            • Jul 2009
            • 2425

            OK, if it's about 3/8" and has the hole in it (like the one in the link), then any Harris bipod will fit.

            Comment

            • #7
              dphouse
              Member
              • Jan 2011
              • 131

              Pricey stuff! I'll try and source one at the next show.

              Comment

              Working...
              UA-8071174-1