Unconfigured Ad Widget

Collapse

Nightforce zero stop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BobLeeSwagger
    Member
    • Sep 2010
    • 251

    Nightforce zero stop

    hello,

    Looking into purchasing a nightforce scope for my next project, however, i can't justify spending almost an extra 200 bucks for the zero stop feature. Is it worth the extra money? If i dont get it, will it be one of those things i regret not getting? Also, is it something i can add later? Any input would be appreciated. Thank You.
  • #2
    civilsnake
    Senior Member
    • Jul 2008
    • 2261

    If you want to participate in certain tactical precision rifle matches and such, or are going super mall ninja with a precision rifle just for fun, then zero stop is a pretty useful thing. If you look at what the serious precision shooters are doing, you'll see the zero stop is pretty common.

    I do believe you can send a scope back to NF to have it installed later. Check the website.
    Then another horse PONY came out, a fiery red one. Its rider was given power to take peace from the earth and to make men slay each other. To him was given a huge sword. My kinda guy.

    Comment

    • #3
      StraightShooter
      Senior Member
      • Jun 2007
      • 2189

      I actually think the zero stop is not important at all. In fact, with a scope with the zero stop they removed the lines below the turret showing which revolution you are on. For instance with the nightforce on my .243 (non zero stop) I know that my zero is when you can see the third line below the turret cap. If I can see number 5 then im two revs up. Now on my .338 Lapua it has a zero stop without these lines so when shooting long range I cant tell if im 2,3,4,5,6 revs up without dialing all the way back to the zero stop and starting over which is a pain in the ***. If nightforce would have just left the lines on the zero stop models it would be much more useful. The only time I think zero stop is important is when you are shooting in no light/low light conditions where you want to be able to find your zero point and count clicks back up because you cant see the markings on your turrets.

      Brandon M.

      Comment

      • #4
        mikeinla
        CGN/CGSSA Contributor - Lifetime
        CGN Contributor - Lifetime
        • Aug 2007
        • 1916

        Nightforce charges $340 plus shipping both ways to add zero stop

        Comment

        • #5
          killshot44
          Veteran Member
          • Nov 2009
          • 4072

          I just bought a 8x32 NXS with no Zero Stop. I can't see a reason for it, you should be able to see/remember where you are in the Turret. Maybe a SDM in a firefight could appreciate it.

          I'm just amazed it's not a Magpul invention...

          Comment

          • #6
            BobLeeSwagger
            Member
            • Sep 2010
            • 251

            Originally posted by killshot44
            I just bought a 8x32 NXS with no Zero Stop. I can't see a reason for it, you should be able to see/remember where you are in the Turret. Maybe a SDM in a firefight could appreciate it.

            I'm just amazed it's not a Magpul invention...
            hey that's the model i wanted to get but did'nt come with zero stop. I dont think i'll ever shoot at night or compete, and i think the come up lines on the turrets should be enough to let me know where my zero is.

            I really wanted the 8x32 or the 12x42 model, but can you have too much magnification? I mean, i have a 3x mag on my ar rite now, and i cant see anything with it even at 100 yards.

            SDM??

            Comment

            • #7
              StraightShooter
              Senior Member
              • Jun 2007
              • 2189

              It depends on what you are doing. I personally wouldnt get anything more than the 5.5-22x unless you are looking to shoot benchrest. If you are shooting at really long range, anything above 22x really starts to magnify the mirage and it becomes impossible to see the target on even just a warm day. The higher mag is only really beneficial if you are shooting paper targets out to maybe 500 yards and want to TRY to see holes in the target. If you are ever planning on hunting or competing with it, you will wish you could dial down below 8x.

              Brandon M.

              Comment

              • #8
                gunsmithcats
                Senior Member
                • Nov 2005
                • 1382

                Havent playd with the higher ends, but I have a 2.5-10x24 I got for my ar-10. Has mil/mil and ZS, which is absolutely crucial since they dont have any markings. When i'm engaging targets at varying distances, it really helps to have the zs to reset things and work from there.
                For Sale!!
                Glock 44 .22lr

                Comment

                • #9
                  Bongos
                  Veteran Member
                  • Oct 2005
                  • 4095

                  ZS is a great feature, on a 308.. it helps as you can only adjust in one direction once zeroed. In a 223, I find you do not need it, as 400-500 yards is you max, the bullet drop on a 55gr is fro 400 yards is around 4.75" (19 clicks) which is not even a full rotation. On a 308 however you might have to adjust +20" or more depending on your distance and can forget your zero and what line you have to go back on.

                  Comment

                  • #10
                    killshot44
                    Veteran Member
                    • Nov 2009
                    • 4072

                    Originally posted by Bongos
                    ZS is a great feature, on a 308.. it helps as you can only adjust in one direction once zeroed. In a 223, I find you do not need it, as 400-500 yards is your max
                    I'll have to remember that when I'm shooting my .223 in matches out to 1K.............

                    If anything, a .223 user deals much more with the elevation/windage adjustments than a .308 does. Don't need a zero-stop.

                    Comment

                    • #11
                      Bongos
                      Veteran Member
                      • Oct 2005
                      • 4095

                      Originally posted by killshot44
                      I'll have to remember that when I'm shooting my .223 in matches out to 1K.............

                      If anything, a .223 user deals much more with the elevation/windage adjustments than a .308 does. Don't need a zero-stop.
                      Woo Hoo! so you are lobbing your 223 out to 1K... that is Just Excellent! Congrats! Will it kill a deer or anything out at that range or are you just hitting steel? It's nice to know you can do it. I only judge calibers on justifible effective kill shots without chance of making the animal suffer.

                      Comment

                      • #12
                        Nessal
                        Banned
                        • Jan 2009
                        • 2261

                        I have zero stop and it is nice but i heard guys were retrofitting their own onto the nightforce for 5 bucks in parts and works just like factory or something.

                        Comment

                        • #13
                          CSTactical
                          Vendor/Retailer
                          • Sep 2007
                          • 4100

                          Hi-Speed 0-Stop turrets all the way.



                          Mike @ CST
                          Dealer for Zero Compromise Optic, Tangent Theta, Leupold, Nightforce, Vortex, Aimpoint, Desert Tech, Swarovski and more...
                          Call 916-670-1103 for Calguns pricing
                          www.cstactical.com
                          sales@cstactical.com
                          916-670-1103

                          sigpic

                          Comment

                          Working...
                          UA-8071174-1