Trijicon Reflex (Red Dot) Help

[AlienDjinn]

I just got a sweet Trijicon Red Dot site for my Sig 522.

I was shooting targets at 7-10 meters, but my shots keep tracking low and to the right.

Per the manual I've adjusted the wind and elevation controls (about 5 clicks counter clockwise and then 10 more clockwise).

I've noticed no real difference in where the bullets are hittting.

Any suggestions?

Thanks!

[berg]

I had one of these that was a real pain to zero. I was chasing my zero all over until I finally got it right. And once adjusted it never lost zero.

One thing I used to do was crank it a few clicks and then lightly tap the body just in case anything was stuck, and then wiggle the whole sight body. Maybe it was not necessary but that was my routine and it finally worked.

You might simply need to click the adjustment screws a little more to get the dot to move where you want it.

[AlienDjinn]

Hi Berg,

Thanks, thought I was going crazy. I'll try out your voodoo that you do so well...

Cheers!

[AlienDjinn]

Thanks to the help of the Calguns community, I got my scope sited in.

It took probably 30 Clicks from both settings to get it zero'd in. Now all of my shots are effortlessly hitting the center of the bullseye!

Appreicate the help everyone!