Mini-14 Target Model Optics Help

[gandalfdagrey]

I just picked up a Mini-14 Target Model and I'd like some recommendations on optics. I'm looking at target shooting at 50 - 200 yards. My price range is $150 or so. I'm looking at BSA Tactical Mil-Dot Rifle Scope but im afraid that its a bit too much for the ranges i'm looking shooting.

I'm new to scopes so thanks for your help in advance.

[Larry]

Check out this thread for more info.

The scope that you're referring to seems like a great deal for the money.

I went with a Leupold Mark AR scope, 3-9x40 (P/N 67165) for my NRA-edition Mini-14 using the factory supplied rings (P/N 5B). No issues with clearance anywhere and plenty of eye relief. I bought it just before the holidays through Optics Planet and it was $299.00 shipped.

I've put about 300 rounds through this setup thus far and the only issue that I've encountered was with the rear ring mounting bolt loosening up after 100 rounds or so. I put some Blue Loctite threadlocker on the bolt and it seems to have fixed the issue.

I love absolutely this scope and setup (I shoot mainly at 50 yards with this setup)

Larry

[reloadyour9]

ive got a rail laying around somewhere for when I had a target. I used a NCstar on that rifle and worked fine. Cheap scope, but actually performed well

[prc77]

Mini 14's are pretty hard on scopes. I would install recoil buffers front and rear. To ease the op rod slap. Then buy a good scope, I have a Nikon Prostaff 3-9x40 on my Mini, 800 rounds down range, and I have had zero problems. With factory med rings.
Check out www.perfectunion.com for some great MINI 14 help

[gandalfdagrey]

Thanks for the help. What do you think about Konus or Weaver scopes? Or should i just invest in a Leopold?